MaxSea Operator Manual version 12.6 - Furuno USA

Electronic Charts
Anchorage area (a name by default is defined) - Beacon, cardinal - Beacon, isolated danger - Beacon, lateral - Beacon,
safe water - Beacon, special purpose/general - Bridge - Buoy, cardinal - Buoy, installation - Buoy, isolated danger -
Buoy, lateral - Buoy, safe water - Buoy, special purpose - Cable area - Cable, overhead - Canal - Cargo transhipment
area - Causeway - Caution area - Conveyor - Crane - Deep water route part - Depth area ( can take value from x to y
meters) - Depth contour (define a value for y meters) - Dredged area (can take value from x to y meters) - Dry dock -
Dumping ground - Fairway - Fishing ground - Floating dock -
Ice area - Incineration area - Inshore traffic zone - Land area ( can take value from x to y meters) - Light vessel - Marine
farm/culture -Military practice area - Obstruction - Offshore platform - Offshore production area - Oil barrier - Pile -
Pipeline area - Pipeline, overhead - Pontoon - Production/storage area - Recommended track - Recommended traffic
lane part - Restricted area - Sea-plane landing area - Shoreline construction - Sounding - Submarine transit lane -
Traffic separation line - Traffic separation scheme boundary - Traffic separation scheme crossing - Traffic separation
scheme lane part - Traffic separation scheme roundabout - Traffic separation zone - Two-way route part -
Underwater/awash rock - Wreck
Example :
Depth range from 20 to 50 meters and the Buoy, cardinal are defined with Karek Kreiz, Land Area.
Antigrounding Dialog
The Antigrounding Dialog is your control center where you can follow all recorded alarms and they history.
To bring up the Antigrounding Dialog click on the "Chart zone information" in the chart palette and choose
"AntiGrounding Master GPS".
The table contains all useful information for each present object having crossed the Security circle boundaries :
1. The date when the alarm is activated.
2. The type object category.
3. Details of the object.
4. Its geographical position.
The alarms are displayed in order of their recording. To change the data order display of each column, simple click in
each column title.
The width of each column can be modified by left clicking a border and drag to the desired position.
You can specify the display position of the palette as you will do with the others palettes (setting the palette position as
a menu bar layout display mode or as a floating layout display mode).
AntiGrounding center display configuration parameters
1. To change the display order in each column of the table, double left-click on its title, a symbol appears located
nearest its title and shows the direction.
2. To modify the width of each column click either on its left border or its right border, move the mouse while
holding down its button to the desired size and release the mouse button.
3. As done for the other Center tables, you can decide on the location and display mode ( "Floating palette" mode,
"toolbar" mode or "Tab" mode).
See also related topic : Advanced configuration
193