MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
TIPS - You can also delete Legs of the Selected Route by clicking on them with the Delete Tool
From the corresponding Centers select a line and press the key on the keyboard for deleting Waypoints and
legs.
Cut the Selected Route in Two Parts
You can cut in two parts the selected route independently of the chosen mode (active route or planning mode)
60
1. Select the route that you will cut in two parts
2. Click a leg with the Split tool on where you want to cut the route
3. The route appears in two parts as shown in pictures Fig. 1 and Fig. 2
Fig.1
IMPORTANT - this command can be done only if the selected route contains at least four QuickWapoints (three
legs at least)
Move Waypoints and Routes
To Move Waypoints in a Route:
1. Select the Position Modification Tool in the Toolbar
2. Click on the Waypoint you want to move, hold the mouse button down, then drag it to the new desired
position
To Move Entirely The Selected Route:
Fig.2
1. Use the Select Tool (Finger) to drag a selection rectangle entirely around the route on the chart.
2. Select the Position Modification Tool in the Toolbar
3. Click on one of the Waypoint, hold the mouse button down, then drag it to the new desired position.
4. This action will move all the selected objects