MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
Weather Information button in the Chart toolbar
pop up menu under the Weather Information button is the default mode display as following:
200
Wind
Waves
Surface Pressure
500mb Pressure
Sea Surface temperature
Altimetry
Current
Chlorophyll
Fig. 1: Weather Information menu
Weather Information displayed as floating palette
>> if you click and drag the vertical grey bar and place weather data menu
anywhere you want.
(Fig. 2 - displayed in floating palette mode - Fig.3 -displayed in toolbar
docked to the Window chart . )
>> Click each item to show / hide corresponding weather data on the chart.
To control the Weather Data Information presence in the Weather File
1. Colored icon means that corresponding weather data is available
in the opened weather file.
2. Icon appears surrounded in red when weather data is selected
and displayed on chart as shown below in Fig.1 for the wind
data.
3. Icon appears in gray means that corresponding weather data is
not available in the opened weather file.
To change how the weather data information is displayed on chart
You can use arrows, contour lines, color, Bubbles with text and Wind
feather when displaying weather information. You can change display of
each data layer by selecting the [Option: weather...] item from [Weather]
menu. (see related topic: Option: weather)
Note: functions previously describe are available from the
[Weather Layers] item from the [weather] menu.
Weather x
Fig.2 : Floating palette mode representation
Weather Information displayed as a toolbar docked to the chart palette