MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
Advanced configuration
Miscellaneous preferences.
You can also modify some global parameters which will be added to the former configuration.
That for, you have to open the “cmapconfig.ini” file, localized in “C:\WinNT” or “C:\Windows”, depending the system you
use; then you can tune the values by clicking.
This file allows you to modify:
identification KEY Description
GP_PARAM_ID_SHALLOWCONTOUR Sets value of the shallow contour
GP_PARAM_ID_SAFETYCONTOUR Sets value of the safety contour
GP_PARAM_ID_DEEPCONTOUR Sets value of the deep contour
GP_PARAM_ID_TWOSHADESSCHEME
GP_PARAM_ID_SHALLOWPATTERNUSED
GP_PARAM_ID_PLAINPRESUSED
GP_PARAM_ID_SAFETYDEPTH
GP_PARAM_TEXTIMPORTANT
GP_PARAM_ID_LIGHTS_INFO
GP_PARAM_ID_DANGER_SYMBOL
GP_PARAM_ID_OVERSCALE_PATTEN
194
If 1 the two shades scheme will be used
for depth areas presentation.
If 1 shallow pattern will be used to
present shallow areas more prominent.
If 1 Areas with plain boundaries
presentation is used.
Sets value of the safety depth, all
soundings with the depth value more
safety depth will be shown in gray color.
If 1 important text for navigation will be
displayed (e.g. clearance of a bridge ).
If 1 string with short light description will
be displayed.
If 1 the OBSTRN or isolated underwater
dangers (UWTROC, WRECKS) of depths
less than the safety contour which lie
within the safety water will be presented
by Isolated Danger symbol as hasardous
objects. The category will be set to IMO
category DISPLAYBASE.
If 1 correspondent M_COVR objects from
over scaled Data set will be presented
with OVERSC01 pattern. See
correspondent value for
GP_PARAM_ID_OVERSCALE_FACTOR
.
GP_PARAM_ID_NOT_DANGER_DEPTHS_OFF If 1 all soundings of depth more than
GP_PARAM_ID_SAFETYDEPTH will not
Defaul
t Value
2
meters
30
meters
30
meters
0
0
0
30
meters
0
0
0
0
0