MaxSea Operator Manual version 12.6 - Furuno USA

displaying waypoint. modifiable.
FID This number is the Waypoint identifier in the software and it
is automatically attributed when you add new waypoints. It is
unique and stored in your waypoints database.
Creation Date Only available when the selected waypoint provides from a
GPS transfer process.
Create Waypoints Layers
Software
attribute
External
attribute Not
modifiable.
Waypoints
All Waypoints you create are automatically saved on a default layer named "Waypoint". You can create new layers in
order to organize and sort your Waypoints. Thus you will be able to sort your Waypoints by category in the Center, and
display on the chart only the layer you want.
To create a new Layer :
1. Select [New] then [WP layer...] in the [File] menu.
2. Enter the name of the Layer
3. Click OK to validate
Now, all the Waypoints you will create will be saved on this new layer (known as active layer). To switch layers, just click
and hold down the mouse on the Plotting Tool (Pencil). This will show a drop-down menu where you can select the active
layer. You can also change the Waypoint layer in the Waypoint Center or in the Waypoint Properties box.
To display on the chart only the layer you want, please refer to Show / Hide Waypoints Layers
Notes:
(1) - When a Layer becomes empty, it is automatically deleted.
(2) - The number of Layer is unlimited
Show/Hide Waypoints Layers
You can sort your Waypoints by Layers (see Create Waypoints Layers). If you click and hold your mouse down on the
Routes and Waypoints button (located on the top chart toolbar) a list will appear where you will be able to select which
layer you want to display. Only the layers you select (check mark) will be shown on the chart.
My Waypoints
Waypoints
All waypoints
69