MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
Enter an event to plot fish schools (See also Related Topic: Event Entry.)
Echogram
The NavNet Echogram overlay in the Depth Profile Windows can be done only if a NavNet System is connected. "NO
SWEEP" message appears in the top-left corner of Depth Profile window when no sweep received for 10 seconds
A limit case is that if using 3000m range, an echo may take 4 seconds to delay in its propagation.
Note that horizontal blue lines delimit Echo Sounder Range.
You may choose a display mode for the echogram between three : Manual / Cruising and Fishing modes.
The manual mode allows you to adjust the echogram gain level, Range and its view position. For more information see:
Sounder Palette
MaxSea Mode chosen:
344
1. You can either show or hide the Echogram picture overlay in the Depth profile window. Click the Depth Profile
Information arrow on chart toolbar, then choose and click the Echogram option .
2. The Echogram is always displayed in single Frequence either LF or HF depending on your choice.
NavNet Mode chosen:
1. The Echogram is always displayed in the Depth Profile when NavNet Mode is chosen.
2. The Echogram in MaxSea matches exactly the Echogram in NavNet and you can choose to display the Depth
Profile window either in single or dual frequency mode.
• Echoes displayed are depending on the last 1024 sweeps.
• Shift/Range/Distance are managed for each sweep.