MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
382
AC Rain
Slide 0 - 100
Note: the intensity of the color displayed varies according to the echo power.
See also related topics for :
1. Setting up Radar Gain: Interactive functions
2. Setting up Radar Overlay Display: only for MaxSea display
3. Setting up Radar Signal Processing: Interactive functions
4. Setting up Radar ARPA : Interactive functions
NavNet Radar Gain Settings
GAI
N
Option Range Operation
Gain
Auto/Manua
l
- manual,
- Rough,
-
Moderate
,
- Calm
To adjusts the gain sensitivity of the radar receiver:
1. Click on the Gain Status line to display the Pop-up menu
2. Choose Low, Medium, or High as appropriate Gain Status Automatic or
Manual to adjust it manually.
3. Press [ENTER] to validate.
The proper setting is such that the background noise is just visible on the
screen. If your gain setting is too low, weak echoes may be missed. On the
other hand,excessive gain yields too much background noise; strong targets
may be missed because of the poor contrast between desired echoes and
the background noise on the display.
Gain Level % 0-100 To adjust the Gain value when working with Manual Gain Status:
AC Sea
Auto/Manua
l
- manual,
- Rough,
-
Moderate
,
- Calm
1. Click on the Gain line to display the Pop-up menu
2. Adjust the range from 0 to 100% using arrows or modify it directly by
entering the desired percentage value
3. Press [ENTER] to validate.
To adjusts the AC Sea Status of the radar receiver:
1. Click on the AC Sea Status line to display the Pop-up menu
2. Choose a range according to the sea state ROUGH, RATE,CALM, as
appropriate or manual MODE to adjust it manually
3. Press [ENTER] to validate.
More info...