MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
Edit 3D database
Edit 3D Database
260
Maximum import scale
It is recommended to select a
scale to import your data. It
indicates the precision of the
grid on which data will be
inserted.
For example: for a scale of
1:10000, data will be
available from 1:10000 to
1:250 million.
Note: to display the under
scale value you have to
activate the Overzoom
function (see 3D properties
chapter). Data value will be
available but not precise.
Please pay attention to
following advises:
If you choose the Auto item
from the pop-up, MaxSea will
define the scale of imported
depth value.
Filter:
Select the range of sounding
values that will be inserted in
the database to enhance it. It
is a % value.
This function allows you to display the contents of the database in order to eventually delete or modify non accurate
values.
To edit database, first select [Edit 3D database] from the [Edit] menu:
Then, the following display appears in which you can from this window:
• Delete user data values
• Modify user data values