MaxSea Operator Manual version 12.6 - Furuno USA

More documents

Recommendations

Info

MaxSea Operator Manual version 12.6 Chlorophyll Global 0.06 ° x 0.08° Alaska & Pacific Northwest High Resolution Model 214 Wind Global (except Inland) 0,25°x0,50° Pressure Global (with Inland) 1°x1° Waves Global 0,25°x0,50° Sea Surface Temperature Global 0,05°x0,05° Altimeter Global 0,060°x0,080° Stream Global 0,060°x0,080° Geopotential Height Global (with Inland) 1°x1° Chlorophyll Global 0.06 ° x 0.08° Worldwide GFS model Wind Global (with Inland) Pressure Global (with Inland) only 00H (only one forecast by day) 00H to168H (6H step) 00H to168H (6H step) 00H to168H (6H step) N/A (only one forecast by day) N/A (only one forecast by day) 00H to 72H (24H step) 00H to168H (6H step) only 00H (only one forecast by day) 1°x1° and 2,5°x2,5° 00H to 384H (12H for forecasts > step) 180H 1°x1° and 2,5°x2,5° 00H to 384H (12H for forecasts > step) 180H global update once a day global update every 6 hours global update every 6 hours global update every 6 hours partial update every 1 hour global update once a day global update once a day global update every 6 hours global update once a day 13:00 global update every 05:45 6 hours global update every 05:45 6 hours 05:45 05:45 05:45 00:00 06:30 07:30 05:45 13:00
Geopotential Height Global (with Inland) Wave Watch III Worldwide model Wind Waves Via Navimail Navimail Prerequire Products Global (except Inland & Mediterranean) Global (except Mediterranean) 1°x1° and 2,5°x2,5° 00H to 384H (12H for forecasts > step) 180H 1°x1,25° 1°x1,25° Possess an e-mail and install MaxSea on your PC. 00H to168H (6H step) 00H to168H (6H step) global update every 05:45 6 hours global update every 6 hours global update every 6 hours Weather Forecast 06:10 06:10 The NAVIMAIL program is automatically installed in the MaxSea folder in the same time of the MaxSea program. It is directly accessible in MaxSea from the weather menu. This application allows you, wherever you are on the globe, to order easily different type of data (wind, pressure, waves, surface temperature). The numerical files are delivered through GRIB format and require a MAXSEA to be used. Security bulletins and satellite images concerning your zone of navigation are available free of charge (except telecommunication cost). Operation Orders and deliveries work through e-mail via your telecommunication system, answers being attached files. In order to receive numerical files, you must subscribe for an account in points at METEO-FRANCE on our internet site http://meteopro.cvf.fr However, if you possess such an address my.boat@inmarsat.francetelecom.fr, you directly access to the Navimail service; the orders will be reported to your telecom bill. Help NAVIMAIL help on line You can find all information you need to use it from the [ ? ] tab of Navimail by clicking on the Help button 215
Page 1:
MaxSea Operator Manual version 12.6
Page 4 and 5:
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12:
Page 15 and 16:
USER GUIDE: MaxSea New Faetures 3
Page 17 and 18:
User Interface Looking at the Chart
Page 19 and 20:
Toolbar Cursor Data User Interface
Page 21 and 22:
Notes: (1) - there is a display for
Page 23 and 24:
User Interface 2. To return to the
Page 25 and 26:
Bearing tool The Bearing tool is a
Page 27 and 28:
Select tool (Finger symbol) Lasso R
Page 29 and 30:
Plotting Drawing Type User Interfac
Page 31 and 32:
NavNet system MaxSea-NavNet Overvie
Page 33 and 34:
Legend (1) - GPS Antenna (2) - Rada
Page 35 and 36:
WARNING : NavNet system You have to
Page 37 and 38:
GPS on the chart Your GPS on the ch
Page 39 and 40:
2. Click the Misc tab for calling u
Page 41 and 42:
How to enable the Auto-Scale functi
Page 43 and 44:
GPS on the chart • Enter directly
Page 45:
GPS on the chart 1 - Click on the M
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 57 and 58:
Routes Routes overview A Route is a
Page 59 and 60:
(1) Route using QuickWaypoints, (2)
Page 61 and 62:
Routes Center All your Routes are d
Page 63 and 64:
Name To assign a own name of a rout
Page 65 and 66:
Fig. 1 shows you the selected Leg o
Page 67 and 68:
SOG SOW Speed Over Ground - it is t
Page 69 and 70:
XTE Cross Track Error - The distanc
Page 71 and 72:
Add Waypoints to a Route Additional
Page 73 and 74:
Reverse the Selected Route Routes W
Page 75 and 76:
more information, refer to the rela
Page 77 and 78:
Waypoints Waypoints Overview Waypoi
Page 79 and 80:
access and modify the properties of
Page 81 and 82:
displaying waypoint. modifiable. FI
Page 83 and 84:
Active Route Data Transfer Device O
Page 85 and 86:
On a selected waypoint drawn on the
Page 87 and 88:
Active Route Note: the software aut
Page 89 and 90:
Then choose [New Search and Rescue
Page 91 and 92:
Data Transfer Device Data Transfer
Page 93 and 94:
Note: Tracks (1) - According to the
Page 95 and 96:
NS = Not Supported Data Transfer De
Page 97 and 98:
Data Transfer Device - Rte valid na
Page 99 and 100:
Data Transfer Device - Wpt valid na
Page 101 and 102:
.ErrorChar : 0x\00 .EofChar : 0x\00
Page 103 and 104:
.Parity : 0 .StopBits : 0 .XonChar
Page 105 and 106:
.fRtsControl : 0 .fAbortOnError : 0
Page 107 and 108:
.XonChar : 0x\11 .XoffChar : 0x\13
Page 109 and 110:
- - - - - - - - - - - - - - - - - -
Page 111 and 112:
- MxDemandeStatutGPS : PNTI,000 ---
Page 113:
When GPS upload function is activat
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 123 and 124:
User's Data Adding personal marks U
Page 125 and 126:
User's Data The left part of the bo
Page 127 and 128:
Repeat the operation, changing the
Page 129 and 130:
User's Data You can either display
Page 131 and 132:
User's Data 3. Type in your text (6
Page 133 and 134:
3 - to delete the mark. 4 - to sele
Page 135 and 136:
User's Data Using the Position modi
Page 137 and 138:
User's Data To do this, first selec
Page 139 and 140:
6. Closing user's data layer file (
Page 141 and 142:
Drawing layer's catalog All drawing
Page 143 and 144:
(2) - only the layers modified sinc
Page 145 and 146:
Note: in case of a bad version or a
Page 147 and 148:
• The AutoCAD file has to respect
Page 149 and 150:
User's Data Plotting and modificati
Page 151 and 152:
Electronic Charts Electronic Charts
Page 153 and 154:
4 - the chart is opened and display
Page 155 and 156:
Electronic Charts IMPORTANT - Each
Page 157 and 158:
2 - Using the "Zoom in" and "Zoom o
Page 159 and 160:
Downstair left-hand corner window c
Page 161 and 162:
Electronic Charts The chart is show
Page 163 and 164:
W000 / W003 Electronic Charts IMPOR
Page 165 and 166:
Electronic Charts Specific items ac
Page 167 and 168:
019 Arc 1950 -- Malawi 020 Arc 1950
Page 169 and 170:
086 Kertau 1948 -- West Malaysia &
Page 171 and 172:
151 Provisional S. American 1956 --
Page 173 and 174:
2 - The chart data display depends
Page 175 and 176: Mapmedia mm2 Charts Electronic Char
Page 177 and 178: Electronic Charts 3. Chart File Not
Page 179 and 180: Electronic Charts The chart which w
Page 181 and 182: Electronic Charts To obtain informa
Page 183 and 184: Opening a M.C. Pack Chart file Elec
Page 185 and 186: The Status allows the user to know
Page 187 and 188: Tips Electronic Charts The Chart Zo
Page 189 and 190: Following list shows available C-Ma
Page 191 and 192: Note: to order C-MAP NT/PC refer to
Page 193 and 194: To display an own configuration: 1.
Page 195 and 196: C-Map NT Chart Object Properties Yo
Page 197 and 198: Closing C-Map NT chart Electronic C
Page 199 and 200: CMAP NT CMap CM93 v3 Geographic Gri
Page 201 and 202: • Other in standard S52. • S52
Page 203 and 204: Electronic Charts The "Change Confi
Page 205 and 206: Electronic Charts Anchorage area (a
Page 207 and 208: GP_PARAM_ID_PLAIN_DEPCNT GP_PARAM_I
Page 209 and 210: Weather Forecast Weather overview M
Page 211 and 212: 2. save it to your computer • Cli
Page 213 and 214: Weather Forecast 1. click and drag
Page 215 and 216: Wind feather : For wind information
Page 217 and 218: 06 09 : 13 Jan. 18. -06 01 : 00 Sel
Page 219 and 220: • Second number (00s). Note : 1 h
Page 221 and 222: (see Register to MaxSea Chopper cha
Page 223 and 224: • To receive Select Subscribe to
Page 225: Pressure Global (with Inland) 1°x1
Page 229 and 230: Tides and Tidal Currents Tides and
Page 231 and 232: • Use the right-click menu on sel
Page 233 and 234: The tidal height function is used t
Page 235 and 236: Tides and Tidal Currents Arrows bec
Page 237 and 238: Tides and Tidal Currents Note for e
Page 239 and 240: When you choose to display this win
Page 241 and 242: 2D Bathymetric Maps 2D Bathy Maps W
Page 243 and 244: IMPORTANT 2D Bathymetric Maps MaxSe
Page 245 and 246: IMPORTANT Display only User data 2D
Page 247 and 248: The configuration is simultaneously
Page 249 and 250: Overlaying simultaneously several t
Page 251 and 252: 2D Bathymetric Maps Here the "isoba
Page 253 and 254: 3D Bathymetric database 3D Bathymet
Page 255 and 256: 3D Database Import Import data to M
Page 257 and 258: By choosing in the first zone area
Page 259 and 260: Click on "Open" and the file path w
Page 261 and 262: User comments [PARAMETERS] HeightUn
Page 263 and 264: Note: 1. To add several user data f
Page 265 and 266: 3D Bathymetric database • Before
Page 267 and 268: BE CAREFUL: this operation can take
Page 269 and 270: How to configure the Offset Data Im
Page 271 and 272: Then choose a station from the harb
Page 273 and 274: MaxSea allows to display independen
Page 275 and 276: See also related topics: 1. Modify
Page 277 and 278:
Correct value representation First
Page 279 and 280:
After you have chosen the option se
Page 281 and 282:
To do it select [Manage 3D database
Page 283 and 284:
Repair the 3D database MaxSea verif
Page 285:
Archived 3D Database What means arc
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 319 and 320:
Trawl Positioning Dead Reckoning Tr
Page 321 and 322:
ofile Contour Depth Profile Contour
Page 323 and 324:
2. Click on "Trawl" . 3. Select the
Page 325 and 326:
Description: 1 - DAP1 and DAP2 foll
Page 327 and 328:
dY = Horizontal distance from the t
Page 329 and 330:
Dredge Function Dredge Function Ove
Page 331 and 332:
Dredge Quality Inactive dredge (Qua
Page 333 and 334:
Sounder Depth Profile Depth Profile
Page 335 and 336:
4 - Historic Mode • Plot "Events"
Page 337 and 338:
file NavNet (1) HF/LF axSea Mode Na
Page 339 and 340:
Shift level m (maximal value for R+
Page 341 and 342:
Sounder Depth Profile 2. You may sp
Page 343 and 344:
Fig.1 : Représentation du profil d
Page 345 and 346:
MaxSea Depth Profile User Interface
Page 347 and 348:
Scale + Scale - Exaggeration Exagge
Page 349 and 350:
Depth Profile Outline is only depen
Page 351 and 352:
ID Information (1) (2) (3) (4) Disp
Page 353 and 354:
Sounder Depth Profile Fig.1 : Depth
Page 355 and 356:
Enter an event to plot fish schools
Page 357 and 358:
A-scope Sounder Depth Profile • C
Page 359 and 360:
Temperature Graph displayed with Na
Page 361 and 362:
Targets Targets Overview MaxSea sha
Page 363 and 364:
Targets The "Center on" function is
Page 365 and 366:
5. Erase the selected target from t
Page 367 and 368:
Display Position at CPA: TCPA : Tim
Page 369 and 370:
Automatically Tracking Targets The
Page 371 and 372:
IMPORTANT Note : the Target Center
Page 373 and 374:
Note that this item may be disable
Page 375 and 376:
ARPA's Target Symbol To display the
Page 377 and 378:
How to configure AIS system with Ma
Page 379 and 380:
Using the Select point tool double
Page 381 and 382:
Note: the static Data are integrate
Page 383 and 384:
EXTRA IO port : outputs AIS entence
Page 385 and 386:
Input / Output of AIS signal Target
Page 387 and 388:
Buoy's Target Symbol Activating the
Page 389 and 390:
Activating the Fleet tracking To ac
Page 391 and 392:
Radar OVERLAY Radar Overlay Overvie
Page 393 and 394:
Gain Status Gain AC Sea Transmit Ma
Page 395 and 396:
AC Sea Level AC Auto On - Off AC Ra
Page 397 and 398:
Radar / Chart Offset Direction 0-36
Page 399 and 400:
may be missed. FTC % 0-100 To adjus
Page 401 and 402:
6 minutes 12 minutes Setting Up FUR
Page 403 and 404:
Gain AC Sea AC Rain Radar Source Me
Page 405 and 406:
Display Option Range Operation Echo
Page 407 and 408:
Noise Rejection Tune Auto/Manual Tu
Page 409 and 410:
To center on the chart in the radar
Page 411 and 412:
When the Minimum or Maximum Range i
Page 413 and 414:
Acquiring Radar Targets Acquiring R
Page 415:
To Free a Radar Target Radar OVERLA
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 453 and 454:
Professional Weather Routing What i
Page 455 and 456:
At this moment the routing will sto
Page 457 and 458:
Professional Weather Routing Once t
Page 459 and 460:
Professional Weather Routing 4 - al
Page 461 and 462:
Launch a new Route plan Refer to th
Page 463:
Professional Weather Routing The re
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 517 and 518:
Glossary A ACK: Acknowledge ACQ: Ac
Page 519 and 520:
Glossary DDE: Dynamic Data Exchange
Page 521 and 522:
Glossary Manual activation email: I
Page 523:
U Glossary UDP: User Datagram Proto
Page 526 and 527:
Page 528 and 529:
show all

MaxSea Operator Manual version 12.6 - Furuno USA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?