MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
Example:
472
The pin icon vertical Allows displaying the whole table on the screen.
The horizontal pin icon allows folding up the table at the bottom of the screen and appears in
the form of a ' Tab. This mode allows to activating several tables at the same time without
blocking all the display.
Quickly and easily get and go to the information directly on the chart:
"Centers..." list all useful information concerning all your navigation. The header toolbar of each center allows you to :
1. Select all data available in the center table by clicking on ( if you wish selecting only a line in the table
click in it).
2. Un select all data selected in the table by clicking on
3. Center on selected data in the center table by clicking on : then selected data are shown and centered
on chart.
4. Display and order data in each center columns by clicking on, a dialog appears which contains check
boxes according to a Data label list . Check each boxes depending to your choice. You can also choose how
you want to display and ordered your data by clicking on up and down arrows.
5. Show window properties for each selected data by clicking on
6. Enter word or value for researching details on specific data and to validate click on
7. Order contents by choosing an option in the Sort menu list.
8. Activate specific functions according to the selected center, under the Action menu.
9. Resize the Center Window in percentage of display values.
Export all data from centers to another program :
1. Right-click on a line, the contextual menu appears on screen.
2. Choose and click on the "Copy to clipboard..." option,