MaxSea Operator Manual version 12.6 - Furuno USA

Drawing layer's catalog
All drawing user's data layers presently opened, are grouped in a catalog.
To display the Drawing layer's catalog:
• Choose [Catalog] from the [Display] menu to bring up the catalog's window
To choose the layer that you wish to show or hide on the chart:
• Click in each boxes nearest of each layer to specify which layer you wish to display on the chart.
To quickly show or hide all together the selected layers:
• Click the box nearest the first level Drawing layer.
Showing and Hiding user's data layers
To specify which layers you wish to display or hide.
1. Click on the Layer zone button.
2. Check or uncheck each opened layer in the drop down list to show or hide it on the chart.
User's Data
Note: when the active layer is hidden and you plot marks, the layer is automatically activated and appears again
on the chart.
To hide all User's data layers :
1. Click the Layer zone button, at this moment all layers are hidden
Closing user's data layer file (s)
The different user's data layer files that you have created or opened can be displayed on the chart.
To save computer memory and speed up the software, it is best to close all user data layers that are open but not
being actively used.
To close one of these open layer files (it will be on the hard disk, but will not be immediately available in the
software).
To close a data file which you have opened before and which is displayed on the chart:
IMPORTANT
1. select [Close] from the [File] menu.
2. choose the file
3. to simultaneously close several files, press the "Ctrl" key while selecting the files from the close dialog
box.
4. click on close to validate.
Layer.ptf is the active layer by default and can never be closed.
129