MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
52
• Select the Action Menu and choose "Print"
• Or right-click on the Center and choose "Print"
TIPS - You can also select the Action Menu to Copy the Center to the Clipboard and paste it in Excel. This will allow
you to edit the layout and remove unwanted information.
How to move in the Planning Route Center (by using the mouse or the keyboard):
• Vertically or Horizontally navigation into the Planning Route Center, use the arrows on the keyboard.
• The selected line appears surrounded with dotted line.
To change the "Planning Route Center" table display configuration:
• Click the "Grid Option" button to configure the table:
1. To Hide or show desired columns by checking appropriate boxes
2. To Move columns in the Planning Route Center click on UP or Down
• Change the order of column
1. Click on the Title of the Column to select it
2. Drag it to the new position
IMPORTANT - After each modification, the values of the route plan are immediately
updated. Please make sure to choose the DOT (not comma) when entering decimal values.
Selected Route Leg Properties
Each line along a route between two waypoints is known as a Leg. The Leg Properties dialog depends on the
category of the selected Route. There are two sorts of Leg, the Planning Leg drawn in orange and the Active Leg drawn
in red on the chart. The Active Leg consists of your boat traveling (see related topic on Activating a Route for more
information) and the Planning Leg is your draft. You can easily edit each Leg of Selected Route after placing it on the
chart. A Selected Leg can be customized as many time needed, and MaxSea enables to create as many back-up routes
with the Duplicate function as you wish.