MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
106
4. Choose the track saving options, Recording accuracy and the Track line.
5. Click on the Misc tab.
6. Choose the options you wish to display (security circle, directional vectors,....).
Note: repeat this procedure for each one of the connected positioning systems (using the pop-up menu Other
system located in the Positioning system in the upper part of the dialog box) in order to set up all of
them.
Track Profile
With the MaxSea Professional version, measurements from different sensors (depth, water temperature, etc.) can be
recorded for each point of the track .
When a sounder is connected to MaxSea, the measurement from the sounder is recorded for each point of the track.
MaxSea can thus be used to display the bottom profile or the profile of one of the connected sensors (water
temperature, etc.).
Toggle the Depth Profile Window On
• Click on the Chart Desktop Mode on the Toolbar
• Choose to display the Depth Profile window in a chosen mode
The Depth Profile window consist in two parts, the toolbar and its graphical view.
You can display either the profile associated to a previously saved old track, or display the profile of the track which is
being recorded.
You will also learn in related topics:
1. How to display the current track in the depth Profile window and follow up its profile outline. Check that no track
and no object is selected, then go to the related topic to learn more on the "Depth Profile with the MaxSea Mode
selected".
2. How to display a previously saved old track in the Depth Profile window.
Edit & Modify the Track
Editing a track
IMPORTANT
This function is not used when the tracking on function is in use.
To modify Edit track parameters
1. Select an old track using the select point tool
2. Go to the [Edit] menu and choose [Edit track]
The Edit track dialog box appears
To modify a characteristic of the track, check box according to what you want to change between:
1. The line width