MaxSea Operator Manual version 12.6 - Furuno USA

Note:
Tracks
(1) - According to the GPS protocol, the choice can be done on one or several or totality of data.
Data Transfer Device
(2) - In certain cases, you have to do twice the manipulation. You will be warned when the software is ready for
receiving data, at this moment precisely you can configure your GPS in the transmitting mode but you
can also cancel depending to your choice.
1. Check each boxes depending on your choice.
2. Click OK to validate
3. An animation is displayed on screen during the transfer action.
4. When the transfer is completed a second dialog of Warning and Message error report appears
which lists all eventual errors.
Note : some GPS give more details such as waypoint color and symbol. MaxSea enables to display waypoint's
color on the chart but not its symbol icon.
Upload to GPS
The Upload protocol consists in transferring data such as Routes and or Waypoints from your personal computer to your
GPS.
After configuring your GPS data transfer you can access to this function by :
1. Choosing [Upload to GPS] from the [GPS Upload/Download] of the [Route] menu.
2. According to GPS Protocol you can choose which type of data you want to transfer.
Two types of data are allowed. Check the data that you wish upload:
Notes:
1. Waypoints
2. Routes
(1) - Upload to GPS option is only available when this function is possible with connected GPS and if you have
selected waypoints or routes before.
(2) - only one choice is possible at the same time.
(3) - In certain cases, you have to do twice the manipulation. You will be warned when the software is ready for
transferring data, at this moment precisely you can configure your GPS in the reception mode but you
can also cancel depending to your choice.
How to Upload selected Data to GPS:
GPS capabilities allowed If Routes only checked If Waypoints only checked
Transferring Waypoints Data Transfer Not available
Automatic transfer of all selected
81
O