MaxSea Operator Manual version 12.6 - Furuno USA

Display the polar window
Activate the function [Polar curve window] from the [Performance] menu to display the ship’s polar.
By default the full configuration Polar curve window is displayed on middle of the screen.
The polar window contains three parts of informations (refer you to the following paragraph):
Performance
1. on the upper left corner of the window : table of data which are given from the polar file data according to the
yacht characteristics (TWA / TWS / Speed, refer you to the "Polar file" chapter).
2. down on the left of the window : pop up menu to customize the polar curve display.
3. on the right of the window : The polar curve display and data.
Four buttons on the right upper corner of the window to customize the polar window display :
to change the window polar curve window display (full & reduced mode).
Full window polar display mode
to minimize the window polar curve.
to maximize the window polar curve.
to close the window polar curve.
The Polar window
Reduced window polar display mode
By selecting [Polar curve window] from the [Performance] menu the following Polar window is displayed and gives
informations about the boat performance:
413