MaxSea Operator Manual version 12.6 - Furuno USA

Add Waypoints to a Route
Additional waypoints can be added to a Selected Route. Adding Waypoints to a route is depending on which part of the
route you want to modify, there are several methods for adding new waypoints.
Add Waypoints at the end of the Selected Route :
1. Select the Route tool ,
2. Click on the chart wherever you want to place successive waypoints,
3. The waypoints will be added to the end of the route.
Add Waypoints anywhere between the beginning and the end of the route:
1. Select the Insert tool in the Toolbar (note that the cursor is now like this ),
2. k on a Leg in the Route where you want to insert a new Waypoint and drag the cursor to the new position,
3. Waypoint and legs are created when you release the mouse button.
Inserting a Waypoint in the route between Waypoint (2)
and (3)
Inserted waypoint takes the place of waypoint (3)
TIPS - when you click on a leg with the Insert Tool, you can also drag the cursor over an existing Waypoint (made
previously with the Plotting Tool).
You can also add Waypoint to the Selected Route at the end or at beginning by choosing them under the Waypoints
Center list.
Use the Right-click menu on a isolated waypoint to add it to the selected route at the end or at beginning.
Delete Waypoints and Legs in a Route
To delete Waypoints of the Selected Route, simply select the Delete Tool (Pacman ) and click on the Waypoints
you want to erase.
A dialog warns you that "This waypoint will be deleted from all routes".
Click the OK button when prompted to confirm the deletion. The Waypoint will be deleted.
Repeat this operation to erase other Waypoints if necessary.
Routes
59