MaxSea Operator Manual version 12.6 - Furuno USA

Active Route
Note: the software automatically detects the moment when the boat is close enough to the Waypoint. It then automatically
passes to the next Waypoint in the list. A course can there fore be followed by the software without manual intervention (if
the helmsman follows the instructions supplied by the software).
You can select, in [Options...] from the [Route] menu, the automatic passage distance . On the large scale charts
(detailed) you can thus see the distance realized by a circle (of equal radius for the precision chosen) traced all around the
waypoint to be reached.
IMPORTANT
Monitoring of the vessel for safety must be continually provided. The user must ensure that the course is perfectly safe.
See related topics for getting more details on:
1. Routes options
2. Waypoint Auto-Scale function
3. "Out of limits" positioned
Active Route Center
As explained in the previous chapter "Selected Route Center", you can obtain more information concerning the actual
selected Active Route.
To display the Active Route Center Window select [Centers] and [Selected Route] from the [Route] menu.
IMPORTANT - you won't be able to modify any parameters in the Selected Route Center when the route is
activated. If you need to modify parameters you may convert your active route into planning route. Choose to cancel
the Active Route.
The Selected Route center gives you all information concerning the active route and it contains:
75