MaxSea Operator Manual version 12.6 - Furuno USA

Shift level
m (maximal value for R+)
Only available when Manual Mode
is chosen.
Switch between S-(Shift down the
echo view) and S+(shift up the
echo view).
When NavNet Mode is toggled
on, the S- shifts down the
echogram view and S+ shifts up
the echogram view in the Depth
Window .
Changing the NavNet Depth Profile Sounder Display
In NavNet Mode you may only change Echogram Point of View in three display modes:
Either Manual or Fishing or Cruising.
Fishing and Cruising display modes are automatic.
The Manual Mode allows you to adjust the Range and the Shift echoes location.
Manual mode is selected on the Sounder toolbar.
Sounder Depth Profile
S- and S+ buttons are available, click each one depending on your choice to move up or down the
Echogram display view. A blue horizontal line delimits the echogram display down from it.
When S- is clicked the line moves upward and when S+ is clicked the line moves downward.
The Range buttons (R- and R+) are also available.
Selecting a NavNet Depth Profile Display
How to change the display in the NavNet Mode Depth Profile window::
Left-click on item in the Display Mode drop-down
menu to show or hide the appropriate layer.
As it is shown beside the Single Freq is chosen
and the Echogram is displayed in single
frequency.
Dual Freq
Single Freq
Marker Zoom
327