- Page 1:
MaxSea Operator Manual version 12.6
- Page 4 and 5:
MaxSea Operator Manual version 12.6
- Page 6 and 7:
MaxSea Operator Manual version 12.6
- Page 8 and 9:
MaxSea Operator Manual version 12.6
- Page 10 and 11:
MaxSea Operator Manual version 12.6
- Page 12:
MaxSea Operator Manual version 12.6
- Page 15 and 16:
USER GUIDE: MaxSea New Faetures 3
- Page 17 and 18:
User Interface Looking at the Chart
- Page 19 and 20:
Toolbar Cursor Data User Interface
- Page 21 and 22:
Notes: (1) - there is a display for
- Page 23 and 24:
User Interface 2. To return to the
- Page 25 and 26:
Bearing tool The Bearing tool is a
- Page 27 and 28:
Select tool (Finger symbol) Lasso R
- Page 29 and 30:
Plotting Drawing Type User Interfac
- Page 31 and 32:
NavNet system MaxSea-NavNet Overvie
- Page 33 and 34:
Legend (1) - GPS Antenna (2) - Rada
- Page 35 and 36:
WARNING : NavNet system You have to
- Page 37 and 38:
GPS on the chart Your GPS on the ch
- Page 39 and 40:
2. Click the Misc tab for calling u
- Page 41 and 42:
How to enable the Auto-Scale functi
- Page 43 and 44:
GPS on the chart • Enter directly
- Page 45:
GPS on the chart 1 - Click on the M
- Page 48 and 49:
MaxSea Operator Manual version 12.6
- Page 50 and 51:
MaxSea Operator Manual version 12.6
- Page 52 and 53:
MaxSea Operator Manual version 12.6
- Page 54 and 55:
MaxSea Operator Manual version 12.6
- Page 57 and 58:
Routes Routes overview A Route is a
- Page 59 and 60:
(1) Route using QuickWaypoints, (2)
- Page 61 and 62:
Routes Center All your Routes are d
- Page 63 and 64:
Name To assign a own name of a rout
- Page 65 and 66:
Fig. 1 shows you the selected Leg o
- Page 67 and 68:
SOG SOW Speed Over Ground - it is t
- Page 69 and 70:
XTE Cross Track Error - The distanc
- Page 71 and 72:
Add Waypoints to a Route Additional
- Page 73 and 74:
Reverse the Selected Route Routes W
- Page 75 and 76:
more information, refer to the rela
- Page 77 and 78:
Waypoints Waypoints Overview Waypoi
- Page 79 and 80:
access and modify the properties of
- Page 81 and 82:
displaying waypoint. modifiable. FI
- Page 83 and 84:
Active Route Data Transfer Device O
- Page 85 and 86:
On a selected waypoint drawn on the
- Page 87 and 88:
Active Route Note: the software aut
- Page 89 and 90:
Then choose [New Search and Rescue
- Page 91 and 92:
Data Transfer Device Data Transfer
- Page 93 and 94:
Note: Tracks (1) - According to the
- Page 95 and 96:
NS = Not Supported Data Transfer De
- Page 97 and 98:
Data Transfer Device - Rte valid na
- Page 99 and 100:
Data Transfer Device - Wpt valid na
- Page 101 and 102:
.ErrorChar : 0x\00 .EofChar : 0x\00
- Page 103 and 104:
.Parity : 0 .StopBits : 0 .XonChar
- Page 105 and 106:
.fRtsControl : 0 .fAbortOnError : 0
- Page 107 and 108:
.XonChar : 0x\11 .XoffChar : 0x\13
- Page 109 and 110:
- - - - - - - - - - - - - - - - - -
- Page 111 and 112:
- MxDemandeStatutGPS : PNTI,000 ---
- Page 113:
When GPS upload function is activat
- Page 116 and 117:
MaxSea Operator Manual version 12.6
- Page 118 and 119:
MaxSea Operator Manual version 12.6
- Page 120 and 121:
MaxSea Operator Manual version 12.6
- Page 123 and 124:
User's Data Adding personal marks U
- Page 125 and 126:
User's Data The left part of the bo
- Page 127 and 128:
Repeat the operation, changing the
- Page 129 and 130:
User's Data You can either display
- Page 131 and 132:
User's Data 3. Type in your text (6
- Page 133 and 134:
3 - to delete the mark. 4 - to sele
- Page 135 and 136:
User's Data Using the Position modi
- Page 137 and 138:
User's Data To do this, first selec
- Page 139 and 140:
6. Closing user's data layer file (
- Page 141 and 142:
Drawing layer's catalog All drawing
- Page 143 and 144:
(2) - only the layers modified sinc
- Page 145 and 146:
Note: in case of a bad version or a
- Page 147 and 148:
• The AutoCAD file has to respect
- Page 149 and 150:
User's Data Plotting and modificati
- Page 151 and 152:
Electronic Charts Electronic Charts
- Page 153 and 154:
4 - the chart is opened and display
- Page 155 and 156:
Electronic Charts IMPORTANT - Each
- Page 157 and 158:
2 - Using the "Zoom in" and "Zoom o
- Page 159 and 160:
Downstair left-hand corner window c
- Page 161 and 162:
Electronic Charts The chart is show
- Page 163 and 164:
W000 / W003 Electronic Charts IMPOR
- Page 165 and 166:
Electronic Charts Specific items ac
- Page 167 and 168:
019 Arc 1950 -- Malawi 020 Arc 1950
- Page 169 and 170:
086 Kertau 1948 -- West Malaysia &
- Page 171 and 172:
151 Provisional S. American 1956 --
- Page 173 and 174:
2 - The chart data display depends
- Page 175 and 176:
Mapmedia mm2 Charts Electronic Char
- Page 177 and 178:
Electronic Charts 3. Chart File Not
- Page 179 and 180:
Electronic Charts The chart which w
- Page 181 and 182:
Electronic Charts To obtain informa
- Page 183 and 184:
Opening a M.C. Pack Chart file Elec
- Page 185 and 186:
The Status allows the user to know
- Page 187 and 188:
Tips Electronic Charts The Chart Zo
- Page 189 and 190:
Following list shows available C-Ma
- Page 191 and 192:
Note: to order C-MAP NT/PC refer to
- Page 193 and 194:
To display an own configuration: 1.
- Page 195 and 196:
C-Map NT Chart Object Properties Yo
- Page 197 and 198:
Closing C-Map NT chart Electronic C
- Page 199 and 200:
CMAP NT CMap CM93 v3 Geographic Gri
- Page 201 and 202:
• Other in standard S52. • S52
- Page 203 and 204:
Electronic Charts The "Change Confi
- Page 205 and 206:
Electronic Charts Anchorage area (a
- Page 207 and 208:
GP_PARAM_ID_PLAIN_DEPCNT GP_PARAM_I
- Page 209 and 210:
Weather Forecast Weather overview M
- Page 211 and 212:
2. save it to your computer • Cli
- Page 213 and 214:
Weather Forecast 1. click and drag
- Page 215 and 216:
Wind feather : For wind information
- Page 217 and 218:
06 09 : 13 Jan. 18. -06 01 : 00 Sel
- Page 219 and 220:
• Second number (00s). Note : 1 h
- Page 221 and 222:
(see Register to MaxSea Chopper cha
- Page 223 and 224:
• To receive Select Subscribe to
- Page 225 and 226:
Pressure Global (with Inland) 1°x1
- Page 227 and 228:
Geopotential Height Global (with In
- Page 229 and 230:
Tides and Tidal Currents Tides and
- Page 231 and 232:
• Use the right-click menu on sel
- Page 233 and 234:
The tidal height function is used t
- Page 235 and 236:
Tides and Tidal Currents Arrows bec
- Page 237 and 238:
Tides and Tidal Currents Note for e
- Page 239 and 240:
When you choose to display this win
- Page 241 and 242:
2D Bathymetric Maps 2D Bathy Maps W
- Page 243 and 244:
IMPORTANT 2D Bathymetric Maps MaxSe
- Page 245 and 246:
IMPORTANT Display only User data 2D
- Page 247 and 248:
The configuration is simultaneously
- Page 249 and 250:
Overlaying simultaneously several t
- Page 251 and 252:
2D Bathymetric Maps Here the "isoba
- Page 253 and 254:
3D Bathymetric database 3D Bathymet
- Page 255 and 256:
3D Database Import Import data to M
- Page 257 and 258:
By choosing in the first zone area
- Page 259 and 260:
Click on "Open" and the file path w
- Page 261 and 262:
User comments [PARAMETERS] HeightUn
- Page 263 and 264:
Note: 1. To add several user data f
- Page 265 and 266:
3D Bathymetric database • Before
- Page 267 and 268: BE CAREFUL: this operation can take
- Page 269 and 270: How to configure the Offset Data Im
- Page 271 and 272: Then choose a station from the harb
- Page 273 and 274: MaxSea allows to display independen
- Page 275 and 276: See also related topics: 1. Modify
- Page 277 and 278: Correct value representation First
- Page 279 and 280: After you have chosen the option se
- Page 281 and 282: To do it select [Manage 3D database
- Page 283 and 284: Repair the 3D database MaxSea verif
- Page 285: Archived 3D Database What means arc
- Page 288 and 289: MaxSea Operator Manual version 12.6
- Page 290 and 291: MaxSea Operator Manual version 12.6
- Page 292 and 293: MaxSea Operator Manual version 12.6
- Page 294 and 295: MaxSea Operator Manual version 12.6
- Page 296 and 297: MaxSea Operator Manual version 12.6
- Page 298 and 299: MaxSea Operator Manual version 12.6
- Page 300 and 301: MaxSea Operator Manual version 12.6
- Page 302 and 303: MaxSea Operator Manual version 12.6
- Page 304 and 305: MaxSea Operator Manual version 12.6
- Page 306 and 307: MaxSea Operator Manual version 12.6
- Page 308 and 309: MaxSea Operator Manual version 12.6
- Page 310 and 311: MaxSea Operator Manual version 12.6
- Page 312 and 313: MaxSea Operator Manual version 12.6
- Page 314 and 315: MaxSea Operator Manual version 12.6
- Page 316 and 317: MaxSea Operator Manual version 12.6
- Page 320 and 321: MaxSea Operator Manual version 12.6
- Page 322 and 323: MaxSea Operator Manual version 12.6
- Page 324 and 325: MaxSea Operator Manual version 12.6
- Page 326 and 327: MaxSea Operator Manual version 12.6
- Page 328 and 329: MaxSea Operator Manual version 12.6
- Page 330 and 331: MaxSea Operator Manual version 12.6
- Page 332 and 333: MaxSea Operator Manual version 12.6
- Page 334 and 335: MaxSea Operator Manual version 12.6
- Page 336 and 337: MaxSea Operator Manual version 12.6
- Page 338 and 339: MaxSea Operator Manual version 12.6
- Page 340 and 341: MaxSea Operator Manual version 12.6
- Page 342 and 343: MaxSea Operator Manual version 12.6
- Page 344 and 345: MaxSea Operator Manual version 12.6
- Page 346 and 347: MaxSea Operator Manual version 12.6
- Page 348 and 349: MaxSea Operator Manual version 12.6
- Page 350 and 351: MaxSea Operator Manual version 12.6
- Page 352 and 353: MaxSea Operator Manual version 12.6
- Page 354 and 355: MaxSea Operator Manual version 12.6
- Page 356 and 357: MaxSea Operator Manual version 12.6
- Page 358 and 359: MaxSea Operator Manual version 12.6
- Page 360 and 361: MaxSea Operator Manual version 12.6
- Page 362 and 363: MaxSea Operator Manual version 12.6
- Page 364 and 365: MaxSea Operator Manual version 12.6
- Page 366 and 367: MaxSea Operator Manual version 12.6
- Page 368 and 369:
MaxSea Operator Manual version 12.6
- Page 370 and 371:
MaxSea Operator Manual version 12.6
- Page 372 and 373:
MaxSea Operator Manual version 12.6
- Page 374 and 375:
MaxSea Operator Manual version 12.6
- Page 376 and 377:
MaxSea Operator Manual version 12.6
- Page 378 and 379:
MaxSea Operator Manual version 12.6
- Page 380 and 381:
MaxSea Operator Manual version 12.6
- Page 382 and 383:
MaxSea Operator Manual version 12.6
- Page 384 and 385:
MaxSea Operator Manual version 12.6
- Page 386 and 387:
MaxSea Operator Manual version 12.6
- Page 388 and 389:
MaxSea Operator Manual version 12.6
- Page 390 and 391:
MaxSea Operator Manual version 12.6
- Page 392 and 393:
MaxSea Operator Manual version 12.6
- Page 394 and 395:
MaxSea Operator Manual version 12.6
- Page 396 and 397:
MaxSea Operator Manual version 12.6
- Page 398 and 399:
MaxSea Operator Manual version 12.6
- Page 400 and 401:
MaxSea Operator Manual version 12.6
- Page 402 and 403:
MaxSea Operator Manual version 12.6
- Page 404 and 405:
MaxSea Operator Manual version 12.6
- Page 406 and 407:
MaxSea Operator Manual version 12.6
- Page 408 and 409:
MaxSea Operator Manual version 12.6
- Page 410 and 411:
MaxSea Operator Manual version 12.6
- Page 412 and 413:
MaxSea Operator Manual version 12.6
- Page 414 and 415:
MaxSea Operator Manual version 12.6
- Page 417 and 418:
Performance Performance Module Over
- Page 419 and 420:
ship’s course and speed, the VMG,
- Page 421 and 422:
Restart Excel. If a prompted to ena
- Page 423 and 424:
Performance MaxSea will interpolate
- Page 425 and 426:
Display the polar window Activate t
- Page 427 and 428:
According to the Wind speed : Perfo
- Page 429 and 430:
Performance Lay-lines are displayed
- Page 431 and 432:
Performance Note: to change the pre
- Page 433 and 434:
Note that two data among the four c
- Page 435 and 436:
The "Data Trend Center" graph Perfo
- Page 437 and 438:
Customize the display To activate a
- Page 439 and 440:
Weather Routing What Weather Routin
- Page 441 and 442:
Calculate a Weather Routing Before
- Page 443 and 444:
Weather Routing The routing is calc
- Page 445 and 446:
"Display isochrons" item selected "
- Page 447 and 448:
Weather Routing The Route List show
- Page 449 and 450:
Create and Play a Weather Routing A
- Page 451:
AWS Apparent Wind Speed - When the
- Page 454 and 455:
MaxSea Operator Manual version 12.6
- Page 456 and 457:
MaxSea Operator Manual version 12.6
- Page 458 and 459:
MaxSea Operator Manual version 12.6
- Page 460 and 461:
MaxSea Operator Manual version 12.6
- Page 462 and 463:
MaxSea Operator Manual version 12.6
- Page 465 and 466:
Logbook Navigation logbook The Navi
- Page 467 and 468:
Two manners to display a logbook wi
- Page 469 and 470:
A logbook entry is stored in the na
- Page 471 and 472:
Logbook The criteria (course, speed
- Page 473 and 474:
Logbook The archived logbook is the
- Page 475 and 476:
Fill in the text dialog boxes and t
- Page 477 and 478:
Chart Window Controls Configuring y
- Page 479 and 480:
3 Charts 3 Charts, 1 Profile 4 Char
- Page 481 and 482:
Chart Window Controls • Right-cli
- Page 483 and 484:
Chart Window Controls • Holding t
- Page 485 and 486:
3. Paste in a spreadsheet or databa
- Page 487 and 488:
Default The chart is automatically
- Page 489 and 490:
Ctrl + V Paste a selected object fr
- Page 491 and 492:
ALT + F7 Sounder Shift + (*) Right/
- Page 493 and 494:
Software Options Setting Up PBG/2D/
- Page 495 and 496:
(4) - Display 3D settings • Check
- Page 497 and 498:
To set up the measurement units tha
- Page 499 and 500:
choose your display mode Customizin
- Page 501 and 502:
1. Go to the [Display] menu and cho
- Page 503 and 504:
Setting Up Fuel Consumption Select
- Page 505 and 506:
Display XTE The XTE alarm warns you
- Page 507 and 508:
3. Track color 4. Auto saving Softw
- Page 509 and 510:
Software Options 2. Choose a the ch
- Page 511 and 512:
IMPORTANT Chart Source 2 Chart sour
- Page 513 and 514:
Option Range Operation Gain level %
- Page 515:
Time Variable Gain Level 0-9 follow
- Page 518 and 519:
MaxSea Operator Manual version 12.6
- Page 520 and 521:
MaxSea Operator Manual version 12.6
- Page 522 and 523:
MaxSea Operator Manual version 12.6
- Page 525 and 526:
Index 3 3D ........................
- Page 527 and 528:
NavNet System .....................
- Page 529:
517