MaxSea Operator Manual version 12.6 - Furuno USA

User's Data
To do this, first select as explained in the above paragraph, the objects that you wish to transform. You can select either a
single point or a group of point (for example a line).
Once the object has been selected, choose [Change selection] from the [Edit] menu to call up the Modifying selection
dialogue box.
The dialog box consists in two parts :
IMPORTANT
1 - In the upper of the window you can change:
• the color
• the icon symbol
• the line width (this is possible only if the selected object is a line)
• the pattern
1. Check the box nearest the type you wish to change
2. Then select the new type you want to assign.
3. Click OK to validate the transformation.
2 - In the bottom of the window the Object type option allows you :
• to transform all isolated points into a line or area.
• to transform a line or area into isolated points.
1. Choose the transformation parameters from the dialog box in particular the type of new object in the
lower part of the dialog (a line for example).
2. Then click OK.
If you wish to transform isolated points into a line, take care to select points in the order of the required line.
If you wish to transform a line into isolated points, take care to select a type of symbol icon.
Editing a track
See paragraph Editing a track in the chapter Ship track .
related topic:Editing a track
Copying marks and tracks
You can copy personal marks (marks, tracks, etc.) or groups of marks.
1. To do this, first select, as explained in the above paragraph, the marks that you want to copy.
125