MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
368
It allows you to assign your own configuration (you can enter for example; the departure harbor
and the arrival harbor that correspond to your present trip).
Voyage Related Data
Ship Static Data
This part of the dialog box must be filled and the information depends from your present
situation.
You have to enter different parameters as:
Person's number on board and you can either choose a value under the list or enter a specific
number (available number from 0 to 8191 max)
Destination harbor which is limited to 20 characters max.
Trip's duration,
ETA (Estimation Time Arrival), you can either enter a own value or click on "Recalculate ETA"
button to calculate according to computer time and duration.
Navigational Status, select an option under the list.
Choose your boat's belonging category.
Enter boat's corresponding draught which can be defined from 0 to 25.5m.
This part displays two sorts of data :
"static information" on your boat as the MMSI, IMO,
"boat information" as the boat's name which is limited to 20 characters max and the CALL SIGN
which is limited to 7 characters max.
Required antenna position values. Those values are also defined in the dialog box for GPS
configuration, but they are not shared. So you have to enter again the A, B, C, D values
represented on the following picture: