MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
70
Routes
If you click (don't hold) on the button, all layers will be hidden (including the route). To turn them back on, click on the
button again .
Notes : - All Routes are saved on the same layer called "Routes". You cannot make additional Routes Layers
Delete Waypoints
- The Selected Route (orange) appears even if the layers are turned OFF.
- You can also display the Catalog to quickly show or hide all layers together
There are several ways to delete individual waypoints. To prevent accidental data loss, a dialog will appear that asks you
confirm if the waypoint is used in one or several Routes. The command of deleting waypoint is immediate and permanent.
Graphically deleting a waypoint from the chart:
1. Left-click a waypoint with the Delete tool.
2. Right-click on the waypoint and choose the Delete option in the menu list.
3. Select a waypoint by clicking it withe the Select Tool and press the key on the keyboard.
4. Click the Yes button when prompted to confirm. In this case the waypoint will be deleted in all Routes.
Textually deleting waypoints from the Waypoints Center list
1. Right-click a waypoint line in the Waypoints list and choose the Delete option in the contextual menu list.
2. Select a waypoint line, click the Action button in the center toolbar and choose Delete.
3. Click the Yes button when prompted to confirm. In this case the waypoint will be deleted in all Routes.
Note: A dialog appears on screen and warns you that the selected waypoint is used in one or several routes.
The selected waypoint will be deleted from all routes when the deletion is confirmed.