MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
NavNet Radar Display Settings
Display settings allows to adjust Radar Overlay image configuration. Display settings information is not interactive with
other NavNet equipment connected on the network.
Display Option Range Operation
384
Echo Color - GREEN (default)
- Yellow,
- Red,
- Multi-Color
Animated Echo Sweep On - Off
Trail Color
-GREEN (default)
- Yellow
- Red
Trail Time Value in second
To modify echo color.
1. Click on the Echo color line to
display the Pop-up menu
2. Choose Red, Yellow, Green or Multicolor
as desired
Note:Multi-color shows echoes in red,
yellow or green in order of descending
strength
1. Check the Box to start the
Radar Scan in real time
2. Press [ENTER] to validate.
To modify Trail color.
1. Click on the Trail Color line to
display the Pop-up menu
2. Choose Red, Yellow, Green as
desired
3. Press [ENTER] to validate.
Echo trails are simulated afterglow of
target echoes that represent their
movements relative or true to own ship.
This function is useful for alerting you
past possible collision situations.
To define duration of trail track, in
second:
1. Click on the Trail Time line to
display the Pop-up menu
2. Enter duration value in second
3. Press [ENTER] to validate.
Notes :
display --d--h--s
If (Trail Time = 0 sec), NavNet Radar
will turn OFF.