MaxSea Operator Manual version 12.6 - Furuno USA

Fig. 1 shows you the selected Leg of a planning route
between the Quickwaypoint (1) and (2).
Routes
Fig.2 shows you the selected Leg of the active route between
the waypoints (1) and (2).
After plotting a route on a chart, you can use the Properties dialog to calculate the speed of each selected leg, to edit
waypoint position and others data values, to estimate the arrival time (ETA) and speed over water (SOW) of the trip, to
define the waypoint approaches such as the auto scale value, "Out of limits" positioned ( XTE) and passage mode.
Select a Route Leg to edit and modify Properties
1. Under the chart display, double left-click with the Select tool a Lef on along the Route or apply a long click on a
leg and the quick link.
2. Under the Selected Route Center list, select a line and click on the Properties button or use the right-click menu
on a chosen line.
The Leg Properties dialog appears and gives following details:
Label Definitions Value by default
#Leg Seq Number corresponds
to the Route Leg is the
segment of a route
between two waypoints.
identifier in MaxSea.
Leg. Dist Leg Distance - distance
between two waypoints.
Total Dist Total Distance - additional
distance between the first
waypoint and the last
waypoint.
#WP
Waypoint Identifier number
in MaxSea.
Software attribute
Software attribute
Software attribute
Software attribute
Column displayed by
default
53