MaxSea Operator Manual version 12.6 - Furuno USA

Repeat the operation, changing the icon or colors if necessary, to plot several marks.
Plotting lines
User's Data
Proceed as in the above paragraph, but select Line (instead of Isolated point) from the mark-type pop-up menu. Then
select the icon. Of course, you can choose another icon or no icon at all (first box in upper left-hand corner). You can
modify line thickness using the corresponding pop-up menu which is now available in the lower part of the Toolbar.
Before plotting a line:
1. select the line symbol under the pop up "Plotting object type" menu from the Toolbar.
2. choose the width line size under the pop up "Plotting object width line size" menu from the Toolbar.
3. choose a color from the pop up menu "Plotting object color" menu from the Toolbar.
Using the Plotting tool, click a point on the chart to start the line and then click successive points to extend it. To finish
this operation, double click the last point.
Plot other lines as required.
Note: to call up the dialog box which allows you to assign a label, left click while holding down the shift
keyboard.
115