MaxSea Operator Manual version 12.6 - Furuno USA

Display Option Range Operation
Echo Color - GREEN (by default)
- Yellow,
- Red,
- Multi-Color
Animated Echo Sweep On - Off(by default)
Radar / Chart Offset Direction 0-360
(0° T by default)
Radar / Chart Offset Distance 0-100 Nm
(0Nm by default)
FURUNO Radar Signal Processing Settings
SIGNAL
PROCESSING
To modify echo color.
Radar OVERLAY
1. Click on the Echo color line to
display the Pop-up menu
2. Choose Red, Yellow, Green or Multicolor
as desired
Note:Multi-color shows echoes in red,
yellow or green in order of descending
strength
1. Check the Box to start the
Radar Scan in real time
2. Press [ENTER] to validate.
To define the Chart offset heading:
1. Click on the Radar / Chart Offset
Heading line to display the Pop-up
menu
2. Enter the desired heading offset
from 0 to 360 using arrows or modify
it directly by entering the desired
heading correction value
3. Press [ENTER] to validate.
In some instances position may be off by
a few seconds. For example, the position
of the ship is shown to be at sea while it
is in fact moored at a pier. You can
compensate for this error by offsetting
chart position
To define the Chart offset Distance:
1. Click on the Radar / Chart Offset
Distance line to display the Pop-up
menu
2. Enter the desired distance offset
from 0 to 100 using arrows or modify
it directly by entering the desired
distance correction value
3. Press [ENTER] to validate.
Option Range Operation
393