MaxSea Operator Manual version 12.6 - Furuno USA

Reverse the Selected Route
Routes
When a planning route is created, waypoints are automatically numbered in numerical order as it is shown in the following
picture. In order to navigate a route in the opposite direction, you have to reverse the route. This action can only be done
under the Routes Center window.
To reverse the order of a route:
Route selected on the chart
1. Open the Selected Route Center, select [Centers] and choose [Route] from the [Route] menu.
2. Select the Route you want to reverse (the Selected Route appears in orange)
3. Click on "Action" in the Route center toolbar and choose "Reverse Route"
The same Route on the chart after reversing
TIP - you can also use the right-click menu on a line in the Routes Center to quickly access to the reversing route
function.
Duplicate Existing Routes
You can duplicate as many time as needed before setting up the Planning Route. This can be useful to plan different
routes with same trip.
The easiest way is to display the Routes Center. This lists all routes stored in your database.
You can access this function directly from the Routes Center without showing graphically the route on the chart. Select
[Centers] from the [Route] menu and Choose [Routes] for showing it.
1. Click on a line in the table according to a chosen route.
61