MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
62
2. Click the "Action" drop down menu in the toolbar and choose "Duplicate Route" in the list.
TIP - you can also use the right-click menu on a line in the Routes Center to quickly access to the duplication route
function.
Delete Entire Route
To delete a route:
1. Display the Routes Center and click a line for choosing the route to be deleted.
2. Press on your keyboard or click the "Action" button in the center toolbar and choose the Delete option.
3. A dialog is displayed to confirm the deletion the Route with the ID number.
4. Click the Yes button when prompted to confirm the deletion.
Tips - you can also:
Right-click on a Route and select "Delete Route"
Click with the Delete Tool (Pacman) on an UNSELECTED route (display in blue)
Import Previous Routes
You can open a Route that you have already recorded with a MaxSea previous version, or save as a GPX file (format
which is compatible with various software).
Importing a .wpt file :
or
1. Under the [file] menu, select [Open...]
2. Search and choose the required planning route (xxxxx.wpt file) and then click "Open".
1. Under the [Route] menu, select [Import] and click on [Import .wpt file...]
2. Choose a Route file and click "Open".
Importing a .gpx file:
1. Under the [Route] menu, select [Import] and click on [Import .gpx file...]
2. Search and choose the required "xxxxx.gpx" file on your hard disk and then click "Open".
The planning route is then displayed on the chart and added in the Routes Center.
Note: you can only display one route plan at a time on the chart. You can also open route file saved with
previous software version.
IMPORTANT - If the active file and the chart are in known and different datum , you have to convert the datum. For