MaxSea Operator Manual version 12.6 - Furuno USA

Note:
1. To add several user data files in same way click on "Add files" again.
3D Bathymetric database
2. To delete a selected file in the window, first select the displayed file and click on Clear selection button
3. At last click "OK" to start the import
Before importing data to 3D database, the software suggests you to adjust some parameters (for more information
refer you to chapter How to configure data import "from ASCII (*.xyz)" file)
Import Digital Elevation Model
Allows you to import data from bathymetric charts such as:
World-wide data (provided with the 2D module),
Mapmedia data (SHOM, IFREMER).
To import data from "3D charts" you have to:
• Select D.E.M. box (Digital Elevation Model)
• Click Add files button to select a 3d data file
• An "Open file" dialog box appears that allows you to select the file you want to import in your database.
251