MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
48
2. Choose the [Import Selection to Route] option from the [Route] menu.
3. Then the selection is automatically converted to waypoints and a planning route (see following picture)
Note:
Making a Route from selected lines
(1) - if a route was drawn before on the chart the previous planning route will be closed.
(2) - The line will NOT be erased. The Route will be superimposed to the line or the track.
Cancelling the selected Route
This feature does not delete the route from MaxSea. It allows you to cancel the Planning Route on the chart. Even if the
route is made invisible, the route still exists and can be made visible on the chart at any time. To show it again you may
display the Routes Center and select it in the list by clicking a Route line.
Two ways for cancelling the Planning Route:
1. Select [Unselect Route] from the [Route] menu.
2. Or double click the Route tool in the Toolbar.
Fig.1
(1) Selected Route
(2) Unselected Route
This function will be used each time for creating a new planning Route.