MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
Transferring Routes & Waypoints Automatic transfer of all separated
waypoints which belong to the routes and
then after all selected routes.
Uploading Routes and waypoints:
They are two kinds of data in a route : routes information and waypoints.
82
waypoints.
Automatic transfer of all selected
waypoints.
Refer to the GPS characteristics because some of them are limited in transferring data capacity. If the selected route
number exceeds this capacity, you will be warned and you will have to cancel this transfer.
The Route name consists for the GPS in its identifier . This name has to respect the GPS characteristics such as length,
valid characters...AND EACH NAME MUST BE UNIQUE.
Before transferring data, a dialogue will appear on screen and ask you to verify DATA's format according to your GPS's
model. You can then validate or modify the GPS ID according to its protocol.
This can be done for each new GPS protocol or when it is the first time Waypoints or Routes are transmitted.
FID Name GPS ID
Software ID#1 Object User Name#1 GPS identifier#1
Software ID#2 Object User Name#2 GPS identifier#2
The name must respect the name format according to characteristics of the GPS.
Note that the FID and GPS name can not be updated, the first one is the unique identify of the software and the other is
the GPS identify.
IMPORTANT
Error messages will be displayed:
• If no active route is defined, the software warns you that the data transfer is impossible. Draw a route and
restart the data transfer process.
• A message warns you that the active route will be deleted when the data transfer is activated.
• At last a message will warn you that the route stored in your GPS will be replaced by the present active route.
GPS Transfer Compatibility
Upload: The following table lists all Categories of GPS model which are compatible with MaxSea upload protocol
LEGEND
W: waypoints
R: Routes
TEST
X = Material tested by MaxSea International,
O = not tested
A
s
to