DOE-2 Reference Manual Version 2.1 - DOE2.com

ELEC-SCHEDULEELEC-KWVERT-TRANS-SCHVERT-TRANS-KWshower room, laundry, etc. Both types of HOT-WATER loadsare passed to the same domestic hot water heater in thePLANT program.identifies a previously entered schedule that is used tospecify the building level electriCity use as a function oftime. Schedule inputs are fractions of the quantityspecified by the ELEC-KW keyword. If ELEC-SCHEDULE is notinput, the schedule values will all default to zero and noelectrical usage will occur, regardless of the valuespecified for ELEC-KW.is the maximum building level electricity use (in kW). Itis adjusted by the schedule named in ELEC-SCHEDULE. ThiselectriCity use is in addition to any electric use specifiedin the SPACE and SPACE-CONDITIONS instructions.identifies a schedule that is used to specify usage ofvertical transportation devices, i.e., elevators andescalators. Schedule inputs are fractions of the quantityspecified by the VERT-TRANS-KW keyword. If VERT-TRANS-SCHis not input, the schedule values will all default to zeroand no power usage for elevators and escalators will occur,regardless of the value specified for VERT-TRANS-KW.is the maximum building level demand (in kW) for operatingelevators and escalators. This electricity use is inaddition to any electric use specified in the SPACE andSPACE-CONDITIONS instructions.III.40 (Revised 5/81)