DOE-2 Reference Manual Version 2.1 - DOE2.com

7-12 L A code-word specifying the output file type.Options are OLD, NORMAL, and SOLAR as describedin columns 43-48 of PACK. It must be the sameas on the packed input file.Card 3:Card 4:Card 5:Assuming that clearness numbers and ground temperatures are beingchanged, should be blank or a 0 in column 6.Should have the same format as Card 5 in PACK for the new groundtemperatures* .Should have the same format as Card 4 in PACK for the newclearness numbers*.If clearness numbers and ground temperatures are being changed, thenn = 6, 8, 10, 12, etc., for successive hourly data being changed. Ifclearness numbers and ground temperatures are not being changed then n = 3, 5,7, Y, etc.Card n:4. STATCard n+1 :Columns1-67-1213-18Columns1-67-1213-1819-2425-3031-3637-4243-4849-5455-60FormatRRRFormatD0DDDDRRDDMonth of changeDay of changeHour of ch an geDescription( 1-12){1-31 )(1-24 )DescriptionNew wet-bulb temperatureNew dry-bulb temperatureNew dew-point temperatureNew pressureNew wind speedNew cloud amoun tNew cloud typeNew wind directionNew total horizontal solarNew direct normal solar( F)n)n)(inches of Hg)(knots)(0-10 )(0,1,2)(0-15)(Btu/hr-ft2)(Btul hr-ft2)If any field has -999. (in D format) or -999 (in R format), theold value remains unchanged. All fields must be filled eitherwith a new value or an indication that the old value is to beun ch an ged.Note that if dry-bulb temperature is changed, the user shouldalso correct the dew-point temperature so that calculatedhumidity will be correct.Card last: The EDIT option must close with a card with -999 in column 3-6.Only one card is necessary for the STAT option with the word STAT incolumns 1-4.*Note that the clearness numbers and ground temperatures are reversed for theEDIT option only.V 111.40 (Revised 5/81)