DOE-2 Reference Manual Version 2.1 - DOE2.com

categories will be used in a regular LOADS run to calculate the heating andcooling loads; the room air weighting factors are used in SYSTEMS to calculatethe air temperature of each space.Following the illustrations for "Example c." the user will find a list ofWARNING and ERROR diagnostics for the program that generates Custom WeightingFactor s.Another example Custom Weighting Factor run may be seen in the 00E-2Samp 1 e Run Book.c. Creating Custom Weighting Factors from BOLLIB. In this situation, theuser wishes to create Custom Welghting Factors for his SPACEs using theprespecified library of ooE-2 materials, walls, and roofs. BOLUB is attachedto the program, and the input file may contain references to the prespecified1 ibrary MATERIALs and LAYERS along with the required input information tocreate Custom Weighting Factors. The output of this run, USRUB, will thencontain all the information that was in BDLUB plus the newly created CustomWei gh ting Factors.d. Combining the Prespecified and a User-Specified Library. Rememberthat, after a LIBRARY-INPUT LOAOS run, the output file, USRLIB, will containwhatever was in BOLUB at the beginning of the run plus any library createdduring the run. Therefore, to contJine his own with the 00E-2 library, theuser proceeds as in Example b. except that in the first run, the prespecifiedlibrary BDLUB is attached to the program so that the output library, USRUB,will contain both the prespecified 1 ibrary and the user-specified items.Examples b. and c. depict the necessary steps in this process. Note againthat the space on BOLUB is limited. To avoid overfill ing BOLUB, see thediscussion before Example a. on the limitations of BOLLIB.II 1.158 (Revised 5/81)