DOE-2 Reference Manual Version 2.1 - DOE2.com

More documents

Recommendations

Info

The individual instructions are described in more detail in theirrespective sections later in this chapter.Ex amp le 2:DS1 = DAY-SCHEDULEWS1 = WEEK-SCHEDULESl = SCHEDULEHOURS = (1,24)DAYS = (ALL)THRU DEC 31,VALUES = (68.) ..DAY-SCHEDULE = DS1 ..WEEK-SCHEDULE = WS1The above instructions define a schedule having a value of 68. for everyhour of the year.Although the user may not originally intend to run the simulation for themaximum period of time, one year (JAN 1 THRU DEC 31), it is often wise tospecify schedules for the entire year. The reason for this statement is thatthe RUN-PERIOD instruction determines the simulation interval and should thisinterval be subsequently extended beyond the range of the schedules, troubleis almost certain to occur.12. Advanced Scheduling ConceptsOnce the user has become familiar with the basic concepts of scheduling,as presented in the previous section, he may begin to take advantage of someof the more powerful features of the scheduling instructions. To facilitatethe data entry for the simpler schedules, the concept of ·schedule nesting"may be used. When entering a WEEK-SCHEDULE instruction, the nesting featureallows a DAY-SCHEDULE = U-Name sequence to be replaced with the actualday-schedule data normally entered in a DAY-SCHEDULE instruction, with theexception that no keywords are entered, only their value(s). For example, theweek-schedule defined in Example 2 (in the previous section SchedulingConcepts) could also be defined using the nesting feature with the followinginstruction.WS1 = WEEK-SCHEDULE (ALL) (1,24) (68.) ..The nesting feature is also available with the SCHEDULE instruction. Inthis instructon the WEEK-SCHEDULE = U-Name sequence may be replaced with thedata normally entered 1n a WEEK-SCHEDULE 1nstruction, with the exception thatno keywords are entered, only their value(s) are entered. For example, theSCHEDULE instruction in Example 2 of the previous section, SchedulingConcepts, could also be entered using the nesting feature with the followinginstruction.Sl = SCHEDULE THRU DEC 31, (ALL) DS1As a further extension, double nesting could result in the followinginstruction which would define the same schedule for an entire year usingonly one instruction.Sl = SCHEDULE THRU DEC 31, (ALL) (1,24) (68.) ..The user is urged, however, to become familiar with the conceptsdescribed in the Scheduling Concepts section before attempting extensive useof the concepts of advanced scheduling.11.13 (Revised 5/81)
ADVANCED SCHEDULING___ --;-;--::-::-:::-=:--____ ~SCHEDUlEU-name*or SCH(User Worksheet)*Mandatory entry, if SCHEDULE is specified.Notes:1. Acceptable code-words for Month are JAN, FEB, MAR, APR, MAY, JUN, JUl,AUG, SEP, OCT, NOV, DEC.2. Acceptable entries for Day-of-Month are 1 thru the number of days in themonth.3. Acceptable Day-of-Week Code-word(s) are MON, TUE, WED, THU, FRI, SAT, SUN,HOl, WD, WE, WEH and All. All eight days of the week must be specifiedbefore the terminator.4. Acceptable entries for Hour(s)-of-Day are 1 thru 24. All hours must bespecified.5. All user input for this instruction must be in chronological order.11.14 (Revised 5/81)
Page 1 and 2:
Lawrence BerkeleyL r tLos Alamos Sc
Page 4 and 5:
NOTICEThe explicit function of this
Page 6:
USER EVALUATIONDOE-2.1 REFERENCE MA
Page 10 and 11: DOE-2 REFERENCE MANUALTABLE OF CONT
Page 12 and 13: PageB. LDL INPUT INSTRUCTIONS. . .
Page 14 and 15: Page5.6.SYSTEM Control Strategy . .
Page 16 and 17: C. SOLAR SIMULATOR ..1. Introductio
Page 18: B. MANUAL AND TAPE NOTATIONS1. Form
Page 22 and 23: ABSTRACTThis document describes the
Page 24 and 25: algorithms, as modified by Consulta
Page 26 and 27: DOE-2 Staff PersonnelPrincipal Inve
Page 28 and 29: STATUS AND AVAIL.ABILITYMay 1981Thi
Page 30: SERVICE BUREAUMISSOURIMcDonnell-Dou
Page 34 and 35: I. INTRODUCTIONThis Reference Manua
Page 36 and 37: B. PROGRAM PACKAGEThe DOE-2 program
Page 38 and 39: 2. BDL ProcessorThe ~DL Processor s
Page 40 and 41: thermal energy consumption of the b
Page 42: LLNLNBSLDNECAPNOAAORNLPDLSDLSOLMETT
Page 46 and 47: II.BUILDING DESCRIPTION LANGUAGEA.
Page 48 and 49: Rules: 1. Although a U-name may be
Page 50 and 51: The LIKE command will duplicate onl
Page 52 and 53: 9. Typical Run Instruction Sequence
Page 54 and 55: The second approach involves the us
Page 56 and 57: Ex amp le3. It is not possible, in
Page 60 and 61: B. INSTRUCTION DESCRIPTIONSIn the p
Page 62 and 63: 2. The DIAGNOSTIC instruction may b
Page 64 and 65: not the user will find a comment th
Page 66 and 67: Whenever the U-name of a parametric
Page 68 and 69: Examp le:SET-DEFAULT FOR WINDOwWIDT
Page 70 and 71: ----rr--cco-==----- = WEEK-SCHEDULE
Page 72 and 73: 5. A comma and/or one or more blank
Page 74 and 75: Ex amp le 2WEEK-2 = WEEK-SCHEDULE D
Page 76 and 77: ------TIO~-n~a~m~e*~-------;SCHEDUL
Page 78 and 79: Note: A DOE-2 weather year contains
Page 80: The control processor examines all
Page 83 and 84: TABLE OF CONTENTS (Cont.)Page20.2l.
Page 85 and 86: 1. Preparation of Inputa. Prepare B
Page 87 and 88: It is strongly recommended that the
Page 89 and 90: 3. L imitati onsFor DOE-2, the maxi
Page 91 and 92: of the space coordinate system is d
Page 93 and 94: . Space Coordinate SystemThe locati
Page 98 and 99: . Locating and Orienting Building S
Page 100 and 101: BUild:
Page 102 and 103: Surface Y-Axis X=12Y= 2I~ 1----12--
Page 104 and 105: B. LDL Input InstructionsThis secti
Page 106 and 107: 2. To run the LOADS program for Dec
Page 108 and 109:
3. DESIGN-DAYNote: If the user wish
Page 110 and 111:
DEWPT-HIDEWPT-LODHOUR-HIDHOUR-LOWIN
Page 112 and 113:
U-name: DESIGN-DAY or 0-0 (User Wor
Page 114 and 115:
This can produce very strange resul
Page 116 and 117:
Example:The data entry below descri
Page 118 and 119:
5. BUILDING-SHADEThe BUILDING-SHADE
Page 120 and 121:
Building...... ---/ ....... ./1/ ..
Page 122 and 123:
6. BUILDING-RESOURCEThe BUILDING-RE
Page 124 and 125:
BUILDING-RESOURCE or B-R(User Works
Page 126 and 127:
COND ITIONS or SPACE ins truction.
Page 128 and 129:
Return Air PlenumSupply Air."':0-·
Page 130 and 131:
EQUIP-SENSIBLE). If both EQUIPMENT-
Page 132 and 133:
SOURCE-SENSIBLESOURCE-LATENTINF-SCH
Page 134 and 135:
NEUTRAL-ZONE-HTshould be assigned a
Page 136 and 137:
The user may speci fy both types of
Page 138 and 139:
0 name"; SPACE-CONDITIONS or S-C (U
Page 140 and 141:
8. SPECIFYING EXTERIOR WALLS, EXTER
Page 142 and 143:
U - name = CONSTRUCTIONU-VALUE = nu
Page 144 and 145:
.~o~D'.:::itf)IrUJ>
Page 146 and 147:
Outside surface resistanceTable 8De
Page 148 and 149:
~o.CODs/weoO"'lffscliption4·in fac
Page 150 and 151:
Table 27 Transfer Function Coeffici
Page 152 and 153:
9. SPECIFYING INTERIOR WALLS, INTER
Page 154 and 155:
Table 29Transfer Function Coefficie
Page 156 and 157:
10. MATERIALThe MATERIAL instructio
Page 158 and 159:
U-name*MATERIAL or MATInputKeyword
Page 160 and 161:
THICKNESSRu 1 es:1.2.3.4.5.6.7.The
Page 162 and 163:
____ :-;-_-,;:-_____ = LAYERS or LA
Page 164 and 165:
EXAMPLE U-VALUES FOR SOME CONSTRUCT
Page 166 and 167:
ABSORPTANCE for Various Exterior Su
Page 168 and 169:
Rules:Examples:1. Either LAYERS or
Page 170 and 171:
13. GLASS-TYPEThis instruction is u
Page 172 and 173:
The conductance given in glass manu
Page 174 and 175:
TABLE IIL1 (cont)DefaultU-Va 1 ue c
Page 176 and 177:
U-name*GLASS-TYPE or G-T(User Works
Page 178 and 179:
TOP-FLOOR = SPACEFLOOR INTERIOR-WAL
Page 180 and 181:
xYZAZl~IUTHAREAVOLUNEare the coordi
Page 182 and 183:
__ -;;--::-::=;:;--______ = SPACE o
Page 184 and 185:
INF-COEFspecifies an infiltration f
Page 186 and 187:
SOLAR-FRACTIONFRONTBACKLEFTRIGHTTOP
Page 188 and 189:
NWALL = EXTERIOR-WALLCONSTRUCTIONGN
Page 190 and 191:
16. WINDOWThis instruction is used
Page 192 and 193:
U-name= WINDOW or WI (User Workshee
Page 194 and 195:
ConstructionINF-COEFl. Door-Residen
Page 196 and 197:
18. INTERIOR-WALLThe INTERIOR-WALL
Page 198 and 199:
TILTRules:solar radiation is absorb
Page 200 and 201:
0 name= INTERIOR-WALL or I-W (User
Page 202 and 203:
WIDTHLOCATIONCONSTRUCTIONMULTIPLIER
Page 204 and 205:
Rules:Example:this subject in Ref.
Page 206 and 207:
20. LOADS-REPORTThis instruction de
Page 208 and 209:
LOADS-REPORT or L-R(User Worksheet)
Page 210 and 211:
21. HOURLY-REPORT.The HOURLY-REPORT
Page 212 and 213:
* Mandatory entry, if HOURLY-REPORT
Page 214 and 215:
___...,,-,:-:-:=:;:,----____ :U-nam
Page 216 and 217:
VARIABLE-TYPE = GLOBAL(cont)VARIABL
Page 218 and 219:
VARIABLELISTNumberVariablein FCRT
Page 220 and 221:
VARIABLE-LI STNumberVARIABLE-TYPE =
Page 222 and 223:
VARIABLE-LISTNumber12345678Variable
Page 224 and 225:
C. ALTERNATIVE LOAD CALCULATION MET
Page 226 and 227:
temperature. It should be noted tha
Page 228 and 229:
Therefore, if the user is starting
Page 230 and 231:
TABLE III.2 (Cont.)Custom (a) First
Page 232 and 233:
NOTE:When specifying U-names in a l
Page 234 and 235:
There is a hierarchy of libraries t
Page 236 and 237:
walls defined in the LAYERS instruc
Page 238 and 239:
II!USRLi8 ,n SAVLIBIIL ____________
Page 240 and 241:
EXTERIOR-WALL, INTERIOR-WALL, UNDER
Page 242 and 243:
L D L PRO C E S S 0 R I N PUT D A T
Page 244 and 245:
BOlUB containsuser-specified dataan
Page 246 and 247:
Warning Message (3)Meaning:User Act
Page 248 and 249:
Meaning:User Action;All the walls i
Page 250 and 251:
5.6.SYSTEM Control Strategy .......
Page 253 and 254:
IV.SYSTEMS PROGRAMA. INTRODUCTION1.
Page 255 and 256:
daily, and weekly operating schedul
Page 257 and 258:
I TITLE IISET-DEFAULT IlpARAMETERII
Page 259 and 260:
Prepare and enter a ZONE instructio
Page 261 and 262:
TABLE IV.1SDL CommandDAY-RESET -SCH
Page 263 and 264:
SYSTEM-TYPECode-wordSUMSZRHMZSDDSSZ
Page 265 and 266:
Table IV.2 Cont.SYSTEM-TYPECode-wor
Page 267 and 268:
3. Explanation of System Options1)2
Page 269 and 270:
18)19)20)21 )trying to change the s
Page 271 and 272:
. Single-Zone Fan System w/Optional
Page 273 and 274:
TABLE IV.4 -ContinuedCommandSYSTEM-
Page 275 and 276:
c. Mul tizone Fan System (MZS)OUTSI
Page 277 and 278:
CommandZONE-CONTROLZONE-AIRZONESYST
Page 279 and 280:
TABLE IV.5 -ContinuedCommandSYSTEM-
Page 281 and 282:
Table IV.6 shows the commands and k
Page 283 and 284:
TABLE IV.6 - ContinuedCommandSYSTEM
Page 285 and 286:
e. Ceiling Induction System (SZCI)O
Page 287 and 288:
TABLE IV.7CommandZONE-CONTROLZONE-A
Page 289 and 290:
TABLE IV.7 -ContinuedCommand Keywor
Page 291 and 292:
CommandZONE-CONTROLTABLE I V .BAPPL
Page 293 and 294:
TABLE I V.9APPLICABILITY OF 'COMMAN
Page 295 and 296:
h. Floor Panel Heating System (FPH)
Page 297 and 298:
i. Two-Pipe Fan Coil System (TPFC)2
Page 299 and 300:
Page 301 and 302:
j. Four-Pipe Fan Coil System (FPFC)
Page 303 and 304:
TABLE IV.12 - ContinuedCommand Keyw
Page 305 and 306:
Temperature control is achieved by
Page 307 and 308:
Page 309 and 310:
1. Four-Pipe Induction Unit System
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Table IV.1S shows the commands and
Page 317 and 318:
TABLE IV.I5 - ContinuedCommandSYSTE
Page 319 and 320:
n. Constant-Volume Reheat Fan Syste
Page 321 and 322:
TABLE IV.16 - ContinuedCommandSYSTE
Page 323 and 324:
o. Unitary Hydronic Heat Pump Syste
Page 325 and 326:
Page 327 and 328:
p. Heating and Ventilating System (
Page 329 and 330:
TABLE IV.18 - ContinuedCorrunan dSY
Page 331 and 332:
TABLE IV.19CorrnnandZONE-CONTROLZON
Page 333 and 334:
TABLE IV.19 -SYSTEMCommandContinued
Page 335 and 336:
A number of optional features and c
Page 337 and 338:
CommandZONE-CONTROLTABLE IV.20APPLI
Page 339 and 340:
s. Packaged Single Zone Air Conditi
Page 341 and 342:
TABLE IV.21 - ContinuedCommandSYSTE
Page 343 and 344:
t. Packaged Multizone Fan System (P
Page 345 and 346:
Page 347 and 348:
TABLE IV.22 - ContinuedCommandKeywo
Page 349 and 350:
Page 351 and 352:
TABLE IV.23 - ContinuedCommandKey.v
Page 353 and 354:
PTAC with Air-to-Air Heat Pump:This
Page 355 and 356:
TABLE IV.24 - Continued__ ~C~o~mm~a
Page 357 and 358:
5. SYSTEM Control Strategya. Genera
Page 359 and 360:
THROTTLING-RANGE. The cooling set p
Page 361 and 362:
TABLE IV.25 ContinuedSYSTEM-TYPETPI
Page 363 and 364:
COOL-CONTROL = WARMESTZONE AZONE BZ
Page 365 and 366:
Economizer:For SYSTEM-TYPE equals S
Page 367 and 368:
Cautionary Warnings:1. If the user
Page 369 and 370:
. Examplesi. Example Control Strate
Page 371 and 372:
TABLE IV.26 ContinuedMIN- Zone Cool
Page 373 and 374:
Graphically" this example strategy
Page 375 and 376:
For those ZONEs other than the WARM
Page 377 and 378:
air ducts to the ZONE. If the user
Page 379 and 380:
Note: The preceding diagram is vali
Page 381 and 382:
TABLE IV.27MAJOR CONTROL STRATEGIES
Page 383 and 384:
(4) Specify COOL-TEMP-SCH in the ZO
Page 385 and 386:
iii. Example Control Strategy for S
Page 387 and 388:
(7) The desired control strategy fo
Page 389 and 390:
iv. Example Control Strategy for SY
Page 391 and 392:
Graphically, the example strategy f
Page 393 and 394:
Procedure:(1) Specify SYSTEM-TYPE =
Page 395 and 396:
hourly values in the referenced DAY
Page 397 and 398:
Graphically, the Cycling Forced Air
Page 399 and 400:
v. Control Strategy for SYSTEM-TYPE
Page 401 and 402:
Graphically, the strategy for UVT l
Page 403 and 404:
vii. Example Control Strategies for
Page 405 and 406:
temperatures will be used to modula
Page 407 and 408:
viii. Example Control Strategies fo
Page 409 and 410:
'""~'"~'" c.EJ-- '"~«110 0100 0Win
Page 411 and 412:
This establishes the hourly tempera
Page 413 and 414:
TABLE IV.29MAJOR CONTROL STRATEGIES
Page 415 and 416:
(3) Specify COOL-TEMP-SCH in the ZO
Page 417 and 418:
The following is an example of data
Page 419 and 420:
SP-2ZONE DESIGN-HEAT-T = 68DESIGN-C
Page 421 and 422:
COOl-MA.XiHeat'''''1'''00CoolingSet
Page 423 and 424:
DDE-2Coolingc;- SetpointThermo~tatS
Page 425 and 426:
For multi zone and dual-duct system
Page 427 and 428:
S-3; SYSTEM Keyword ; ValueKeyword
Page 429 and 430:
SUPPLY-LOOUTSIDE-HIOUTSIDE-LONotes:
Page 431 and 432:
___ -;-;--_______ =U-nameDAY-RESET-
Page 433 and 434:
108Z642Fig. IV.17.00 2 4 6 8 10XDef
Page 435 and 436:
POOR PRACTICE GOOD PRACTICE GOOD PR
Page 437 and 438:
INPUT SYSTEMSCOOL-CAP-CURVE = CURVE
Page 439 and 440:
__ ---;-;---:;:-,=~-- ; CURVE-F IT
Page 441 and 442:
AIR-CHANGES/HRCFM/SQFTRATED-CFMtemp
Page 443 and 444:
The exhaust fan is assumed to be co
Page 445 and 446:
4. ZONE-CONTROLThe function of the
Page 447 and 448:
Code WordTHERMOSTATICTABLE IV.30BAS
Page 449 and 450:
U-name= ZONE-CONTROL or Z-C (User W
Page 451 and 452:
TABLE IV.32Code-WordCONDITIONEDUNCO
Page 453 and 454:
Warning: When simulating a variable
Page 455 and 456:
Note: This keyword should normally
Page 457 and 458:
6. SYSTEM-CONTROLThe function of th
Page 459 and 460:
If the user has not done so already
Page 461 and 462:
COOL-CONTROLCOOL-SET-TCOOL-RESET-SC
Page 463 and 464:
that the ductwork condenses the hum
Page 465 and 466:
U-narne= SYSTEM-CONTROL or S-C (Use
Page 467 and 468:
7. SYSTEM-AIRThe function of the SY
Page 469 and 470:
If MIN--AIR-SCH is used, the value
Page 471 and 472:
DUCT-AIR-LOSSDUCT-DELTA-TMAX-OA-FRA
Page 473 and 474:
SCHEDULE hours(clock time)1,6(midni
Page 475 and 476:
8. SYSTEM-FANSThe function of the S
Page 477 and 478:
120.0 ,--,r----,-----r----.---,--."
Page 479 and 480:
Table IV.36SYSTEM-TYPEDefaultValue
Page 481 and 482:
RETURN-STATICRETURN-EFFMAX-FAN-RATI
Page 483 and 484:
U-name= SYSTEM-FANS or S-FANS (User
Page 485 and 486:
9. SYSTEM-TERMINALThe function of t
Page 487 and 488:
_____-------: SYSTEM-TERMINAL or S-
Page 489 and 490:
MAX-FLUID-TFLUID-HEAT-CAPWhen the u
Page 491 and 492:
11. SYSTEM-EQUIPMENTFor the simulat
Page 493 and 494:
HeatingCBF ~EIRT ~QE ~COIL-BF * COI
Page 495 and 496:
In both the preceeding examples bot
Page 497 and 498:
TABLE IV.39 (cont)DefaultDefault Cu
Page 499 and 500:
COOL-SH-CAPis the sensible heat rem
Page 501 and 502:
A = coil entering condition,B = coi
Page 503 and 504:
MAX-COND-RCVRYCRANKCASE-HEATCRANKCA
Page 505 and 506:
RATED-HEIR-FCFM *ELEC-HEAT-CAPMIN-H
Page 507 and 508:
__ --,,-=-==-___ = SYSTEM-EQUIPMENT
Page 509 and 510:
InputRangeKeyword Abbrev. User Inpu
Page 511 and 512:
12. SYSTEMThe function of the SYSTE
Page 513 and 514:
Code-WordTABLE IV.40SYSTEM-TYPEGene
Page 515 and 516:
TABLE IV.42Default Heating Sources
Page 517 and 518:
Code-WordDIRECTDUCTPLENUM-ZONESTABL
Page 519 and 520:
U-name= SYSTEM or SYST (Us er Works
Page 521 and 522:
13. PLANT-ASSIGNMENTA special featu
Page 523 and 524:
14. SYSTEMS-REPORTThe function of t
Page 525 and 526:
TABLE IV.45 (contd)SS-GSS-HSS-ISS-J
Page 527 and 528:
15. HOURLY-REPORTThe HOURLY-REPORT
Page 529 and 530:
16. REPORT-BLOCKThe REPORT-BLOCK in
Page 531 and 532:
TABLE IV.46VARIABLE-TYPE = GLOBALV
Page 533 and 534:
VARIABLE-LISTNumberVARIABLE-TYPE =
Page 535 and 536:
VARIABLES BYSYSTEM-TYPE FOR VARIABL
Page 537 and 538:
VARIABLES BY SYSTEM-TYPE FOR VARIAB
Page 539 and 540:
TABLE IV.48VARIABLE-TYPE = U-name o
Page 541 and 542:
VARIABLE-TYPE = U-name of SYSTEM (c
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
TABLE IV.49VARIABLE-TYPE = U-name o
Page 551 and 552:
Page 553 and 554:
d. heating coil design capacitye. c
Page 555 and 556:
design routine will change MAX-SUPP
Page 557 and 558:
sensible cool ing capacities and th
Page 560 and 561:
V. PLANT EQUIPMENT SIMULATION PROGR
Page 562 and 563:
Only one configuration of building
Page 564 and 565:
The primary purpose of the plant is
Page 566 and 567:
PART-LOAD-RATIOPLANT-PARAMETERSCURV
Page 568 and 569:
B. PDL INPUT INSTRUCTIONS1. PLANT-E
Page 570 and 571:
U-namePLANT-EQUIPMENTTYPESIZEAny un
Page 572 and 573:
This page is blank intentionally.V.
Page 574 and 575:
As an example, if three 100-ton one
Page 576 and 577:
5. If a LOAD-ASSIGNMENT instruction
Page 578 and 579:
0 name; PLANT-EQUIPMENT+ or P-E (Us
Page 580 and 581:
TABLE V.4Equipment PART -LOAD-RATIO
Page 582 and 583:
PART-LOAD-RATIO or P-L-R(User Works
Page 584 and 585:
TABLE V.5PLANT-PARAMETERS KEYWORDSC
Page 586 and 587:
TABLE V.5 (cont)Entering stearn tem
Page 588 and 589:
OPEN-REC-COND-PWROPEN-REC-COND-TYPE
Page 590 and 591:
TWR-TEMP-CONTROLTWR-WTR-SET-POINTTW
Page 592 and 593:
DHW-HEATER-FUELELEC-DHW-LOSSaccepts
Page 594 and 595:
PumpsCCIRC-DESIGN-T-DROPCCIRC-HEADC
Page 596 and 597:
KeywordAbbrev.User InputInputDesc.D
Page 598 and 599:
InputRangeKeyword Abbrev. User Inpu
Page 600 and 601:
(-EIR-FT)(-EIR-FPLR)Elec inFor the
Page 602 and 603:
This page is blank intentionally.V.
Page 604 and 605:
ABSORS-CAP-FTABSORS-CAP-FTSABSORS-H
Page 607 and 608:
TABLE V.6 - CONTINUEDKe~ymrd Indeee
Page 609 and 610:
DieselDIESEL-EXH-FPLRDIESEL-I/O-FPL
Page 611 and 612:
EQUIPMENT-QUAD(E-Q)(User Worksheet)
Page 613 and 614:
InputRan~eKeyword Abbrev. User Inpu
Page 615 and 616:
5. LOAD-ASSIGNMENTThe LOAD-ASSIGNME
Page 617 and 618:
PLANT-EQUIPMENT; UTILITYNUMBER ; 10
Page 619 and 620:
In the example above, the electric
Page 621 and 622:
KeywordTYPEOPERATl ON-MODELOAD-RANG
Page 623 and 624:
PRED-LOAD-RANGEfor the equipment no
Page 625 and 626:
where QH, QC, and QE are, respectiv
Page 627 and 628:
PRED-LOAD-RANGE = 2LOAD-ASSIGNMENT
Page 629 and 630:
7. HEAT-RECOVERYThe function of the
Page 631 and 632:
Rules:1. Table V.11 illustrates the
Page 633 and 634:
The correct input for achieving thi
Page 635 and 636:
HEAT-RECOVERY or HEAT-R(User Worksh
Page 637 and 638:
HEAT-STORE-SCHCOOL-STORE-SCHHTANK-L
Page 639 and 640:
For example, a compression chiller
Page 641 and 642:
$DEFINE CHARGING SCHEDULES$TANK-OS
Page 643 and 644:
HOT-TA~= PLANT-EQUIPMENTTYPE HTAI'l
Page 645 and 646:
ENERGY-STORAGE or E-S(User Workshee
Page 647 and 648:
TABLE V.12ENERGY-COST Instruction R
Page 649 and 650:
MIN-MONTHLY-CHGMIN-PEAK-LOADby DOE
Page 651 and 652:
It is recognized that the program m
Page 653 and 654:
ENERGY-COST or E-C(User Worksheet)K
Page 655 and 656:
SITE-FACTORspecifies a number that
Page 657 and 658:
11. REFERENCE-COSTSIf the user wish
Page 659 and 660:
REFERENCE-COSTS or R-C(User Workshe
Page 661 and 662:
13. PLANT-ASSIGNMENTThe special fea
Page 663 and 664:
14. PLANT-REPORTThe PLANT-REPORT in
Page 665 and 666:
TABLE V.14PLANT Program ReportsCode
Page 667 and 668:
----.c;-;-------- ; HOURLY-REPORT o
Page 669 and 670:
------c-:-;------- = REPORT-BLOCK o
Page 671 and 672:
VARIABLELIST123456789101112131415
Page 673 and 674:
TABLE V. 21VARIABLE-TYPE = HERM-CEN
Page 675 and 676:
TABLE V.24VARIABLE-TYPE = DIESEL-GE
Page 677 and 678:
TABLE V.28VARIABLE-TYPE = CTANK-STO
Page 680 and 681:
VI.ECONOMICS PROGRAMA. INTRODUCTION
Page 682 and 683:
The present value of the energy cos
Page 684 and 685:
4. Instruction SequenceIn general,
Page 686 and 687:
U-name= COMPONENT-COST or C-CInputR
Page 688 and 689:
allowed to default to 1.0. The UNIT
Page 690 and 691:
ENER GY -COSTspecifies a list, up t
Page 692 and 693:
C. ECONOMIC EVALUATION METHODSDOE-2
Page 694 and 695:
3. The investment statistics that d
Page 696 and 697:
LA-7689-M Ver. 2.1LBL-S706 Rev. 1DO
Page 699 and 700:
Part 2CHAPTER VII.REPORTSPageVI1.1A
Page 701:
A. INTRODUCTION ....1. Standard Rep
Page 704 and 705:
B. LOADS OUTPUT REPORT DESCRIPTIONS
Page 706 and 707:
EXAMPLE BuILDING JA, CHICAGOOUE-2.t
Page 708:
EX4HPLE 8UILDING lA, CHICAGO DOE-2.
Page 712 and 713:
EXAMPLE BUILDING ~A, CHICAGO om:-2.
Page 714:
l:XAMPLE BJILQINt; lA, CHICAGO 00[-
Page 721 and 722:
EXAMPLE BUILOING ]A, CHICAGO 00[-2.
Page 723 and 724:
ExA~PLE BUILDING 3At CHICAGO OOE-2.
Page 725 and 726:
EXAMPLE au Il DING 3A, CHICAGO00E-2
Page 727 and 728:
EXAMPLE BUILDING 3A, CHICAGO DOE-2.
Page 729 and 730:
..NZ 0~ ~"N·~"~;; NW~ Z " 00~ ~~ Z
Page 731 and 732:
EXAMPLE BUILDING 3A, CHICAGOREPORT-
Page 733 and 734:
REPORT LV-K - WEIGHTING FACTOR SUMM
Page 735 and 736:
REPORT LS-A - SPACE PEAK LOADS SUMM
Page 737 and 738:
REPORT LS-B - SPACE PEAK LOAD COMPO
Page 739 and 740:
EXAMPLE BUILDING 3A, CHICAGO OOE-2.
Page 741 and 742:
EXAMPLE BUILDING 3A, CHICAGO DOE-2.
Page 743 and 744:
HAMPLE BUIlDING 3A, CHICAGO 00E-2.1
Page 745 and 746:
EXAMPLE BUILDI~~ lA, CHICA~O OOE-2.
Page 747 and 748:
EU"PLE lIuILOINt; lA, ('HOoGO OOf-2
Page 749 and 750:
To illustrate how the entries in th
Page 751 and 752:
SIMPLE StrUCTURE RUI'. 3A. (I·ICA~
Page 753 and 754:
SIMPLE ~TRUCTURE RUr.. ,A, nle"";~J
Page 755 and 756:
SIMPLE Srl
Page 757 and 758:
SIMPLF STRUCTURE RU~!A, C~ICAGJDOE-
Page 759 and 760:
12. BUILDINGLATENTCLG LOAD13. BUILD
Page 761 and 762:
.EXAMPLE BUILOING 3A, CHICAGO OOE-2
Page 763 and 764:
EXAMPLE BUILDING U, CHICAGOODE-l.t
Page 765:
, 0 l P R ~ C E S SOH N P U f OAr A
Page 768 and 769:
7. COOLING CAPACITY (KBTU/HR) is ei
Page 770 and 771:
EXAMPLE 8UILDING 3A, CHICAGO DOE-2a
Page 772 and 773:
EXA~plEBulLOING )A, CHICAGO00E-2.1U
Page 774 and 775:
EXAMPlE 8UllOIN~ 311., CHICAGO DOE-
Page 776 and 777:
EXAMPLE BU!LOING 3A, CHICAGO DOE-2a
Page 778 and 779:
eXANPle 8U(lDtN~ lAt CHICAGO OOE-2.
Page 780 and 781:
EXAMPLE BUiLDING 3A, CHICAGO OOE-2.
Page 782 and 783:
EXAMPLE U~ILDING lA, CHICAGO OOE-2.
Page 784 and 785:
EXAMPLE BUllOING 3A, CHICAGO OOE-2.
Page 786 and 787:
EXAMPLE BUlLOIN~ 340, CHICAGO DOE-2
Page 788 and 789:
REPORT SS-G - ZONE MONTHLY LOADS SU
Page 790 and 791:
EXAMPLE BuiLDING 3A, CHICAGO00E-2.1
Page 792 and 793:
EXAMPLE BUILDING 3A, CHICAGOODE-Z.l
Page 794 and 795:
EXAMPLE BUJLDING 3A, CHICAGO OOE-2.
Page 796 and 797:
EXAMPLE BUILDING 3A, CHICAGn 00E-2.
Page 798 and 799:
S{/-l"lE STIlUUUJ.l.[ RUN)A, CH(AGU
Page 800 and 801:
SI~PLE srpU(TUR[ PU~ ~A, CHICAGU DO
Page 802 and 803:
CC===C=>/'I>/'I>/'I>/'I"'>/'I.r~rr~
Page 804 and 805:
• 0 LPRO C E S 5 0 RN "u rD 0\ ,
Page 806 and 807:
EXAMPLE 8UILDING lA, CHICAGOOOE-2.1
Page 808 and 809:
EXAHPLE BUILOING )11"CHICAGODOE-2.1
Page 810 and 811:
EXAHPlE aUILDING lA, CHICAGO00E-2.1
Page 812 and 813:
EXAHPLE BUILDING 3A, CHICAGO 00[-2.
Page 814 and 815:
REPORT PS-A - PLANT ENERGY UTILIZAT
Page 816 and 817:
EXAMPLE 6ulLDI~~lA, CHICAGOKEPQRT-
Page 818 and 819:
EXAHPLE t3UILD!NG 3A, CHICAGO QOE-2
Page 820 and 821:
REPORT PS-C - EQUIPMENT PART LOAD O
Page 822 and 823:
REPORT PS-D --PLANT LOADS SATISFIED
Page 824 and 825:
EXAMPLE DUILDING 3A, CHICAGO 00E-2.
Page 826 and 827:
EXAMPLE BUILDING lA, CHICAGOREPORT-
Page 828 and 829:
EXAMPLE BUILDING JA, CHICAGOOOE-2.1
Page 830 and 831:
EXAMPLE 8UIlOING 3A, CHICAGO OOE-2.
Page 832 and 833:
EXAMPLE BuILOIN~3A, CHICAGOREPORT-
Page 834 and 835:
EXAMPLE BUILDING JA, CHICAGOREPURT-
Page 836 and 837:
EXAMPLE BUILOING- 3A, CHICAGO OOE-2
Page 838 and 839:
E D L PRO C E 5 S 0 R N pur D A T A
Page 840 and 841:
UNIT MINOROVERHAUL COSTMI NOR OVERH
Page 842 and 843:
. ES-A: ANNUAL ENERGY AND OPERATION
Page 844 and 845:
ES-B:LIFE-CYCLE BUILDING AND PLANT
Page 846 and 847:
ES-C:ENERGY SAVINGS, INVESTMENT STA
Page 848 and 849:
EXAHPlE BUILDING lA, CHICAGO onE-2.
Page 850 and 851:
DOE-2.1E Documentation Update: Weat
Page 852 and 853:
Page 854 and 855:
Page 856 and 857:
Page 858 and 859:
Page 860 and 861:
CRevised April, 1999 VIII.12DOE-2.1
Page 862 and 863:
Page 864 and 865:
Page 866 and 867:
Page 868 and 869:
Page 870 and 871:
Revised April, 1999 VIII.22DOE-2.1E
Page 873 and 874:
VIII.WEATHER DATAA. INTRODUCTIONThe
Page 875 and 876:
TABLE VIIL1WEATHER DATAData for add
Page 877 and 878:
DOE-2 LATITUDE LONGITUDE TIME ZONE
Page 879 and 880:
This page has been deleted intentio
Page 881 and 882:
Crescent CityI1 I. Yreka.OrleansI11
Page 883 and 884:
Zone Representative Cities DOE-2 Fi
Page 885 and 886:
D. SOLAR RADIATION DATANone of ther
Page 887 and 888:
SOLMET10 SOLARSOLA","AOIAtION VAlU
Page 889 and 890:
APPENDIX VI I LANOAA TEST REFERENCE
Page 891 and 892:
The first step in the selection pro
Page 893 and 894:
B. MANUAL AND TAPE NOTATIONS1. Form
Page 895 and 896:
D. INVENTORYWBAN NUMBER STATION SEL
Page 897 and 898:
XX XX X XXX. -oSLRRADXXXXVNoNoI
Page 899 and 900:
TAPETAPEFIELD NUMBER POSITIONS ELEM
Page 901 and 902:
TAPEFIELD NUMBERTAPEPOSiTIONSELEMEN
Page 903 and 904:
I NTkOlJUCTl ONSolar radiation and
Page 905:
Co 1 umn77-8182-8586-9394-98* 99-10
Page 908 and 909:
DOE-2 Weather ProcessorThe weather
Page 910 and 911:
Columns Format Description19-24 R T
Page 912 and 913:
7-12 L A code-word specifying the o
Page 914 and 915:
Example 2:To EDIT for August 15 fro
Page 916 and 917:
APPENDIX VIILDMISCELLANEOUS WEATHER
Page 918 and 919:
-0",z",0Uz·0'" _if>lew",a. i'!'"~~
Page 920 and 921:
C. CTI WEATHER TAPES1. GeneralThe C
Page 922 and 923:
YEAR 19b9 TRY Al~AN'. NEW 'ORMONrHl
Page 925 and 926:
A. LDLCommand Word Abbreviation Pag
Page 927 and 928:
KeywordsDIV I DEDRYBULB-HIDRYBULB-L
Page 929 and 930:
Keywords Abbreviation Associated Co
Page 931 and 932:
Code-Words Associated KexwordsAIR-C
Page 933 and 934:
B. SOLCommand Word Abbreviation ~AB
Page 935 and 936:
KeywordDEFROST-DEGRADEDEFROST-TDESI
Page 937 and 938:
Keyword Abbreviation Associated Com
Page 939 and 940:
Code-WordALL-SUMMARYBI-LINEARBI-QUA
Page 941 and 942:
Code-WordAssociated KeywordSS-DSUMM
Page 943 and 944:
Page 945 and 946:
Page 947 and 948:
Page 949 and 950:
KeywordTWR-FAN-CONTROLTWR-FAN-ELEC-
Page 951 and 952:
Code-WordsMETHANOLNATURAL-GASONE-SP
Page 953 and 954:
KeywordAssociatedCommand Word Assoc
Page 955 and 956:
KeywordOUT-I through OUT-12PARAS-KW
Page 957 and 958:
Code-WordLIQ-SOURCEMONTHLYNON-SPARA
Page 959 and 960:
Input or Output Input to OutDut fro
Page 961 and 962:
Input or Output Input to Output fro
Page 963 and 964:
E. EDLCorrrnand Word Abbreviation P
Page 966 and 967:
Code-WordALL-SUMMARYALL-VERIFICATIO
Page 969 and 970:
X. LIBRARY DATAA. SCHEDULES LIBRARY
Page 971 and 972:
100r..., z: ~a: '-' 50&oJ"-l-o MI
Page 973 and 974:
OFFICESWEEKDAYSWEEKENDS & HOLl D,L,
Page 975 and 976:
SMALL RETAIL STOREWEEKDAYS & SATURD
Page 977 and 978:
SCHOOL/CLASSROOMREGULAR SCHOOL...10
Page 979:
100 1~z...u so... '"c.~1o M 4100 ,~
Page 982 and 983:
1. Thermal Properties of Buildina M
Page 984 and 985:
Thermal Properties of Buildin9 Mate
Page 986 and 987:
Tho ... l Propertl., of 8ullding Mo
Page 988 and 989:
Thermal Properties of Building Mate
Page 990 and 991:
The ... , Properties of Insul.tlng
Page 992 and 993:
4. NotesNOTESTOTables of Materials
Page 994:
11. "TRNSYS - A Transient System Si
show all

DOE-2 Reference Manual Version 2.1 - DOE2.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?