12.07.2015 Views

DOE-2 Reference Manual Version 2.1 - DOE2.com

DOE-2 Reference Manual Version 2.1 - DOE2.com

DOE-2 Reference Manual Version 2.1 - DOE2.com

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Revised April, 1999 VIII.15<strong>DOE</strong>-<strong>2.1</strong>E Documentation Update: Weather ProcessorUsing Standard Formats for Measured DataAs an alternative to using the OTHER subroutine for measured or nonstandard data, one can convert the measured/nonstandarddata into one of the standard formats and then run the <strong>DOE</strong>-2 weather processor on that format. For weather with no solar data,convert to the TRY format described below under “TRY Format,” and then PACK with the weather processor using TRYSLM.Only the following TRY data fields need be filled (all unfilled fields should contain 9's):hourdaymonthyearstation numberdry-bulb temperaturewet-bulb temperaturedew point temperaturewind directionwind speedstation pressuretotal sky covertype of lowest cloud layerpresent weatherFor data sets with measured solar data, if global and direct are known, use the TMY2 format, described below under “TMY2Format.” The only hourly fields that need to be filled are:hourdaymonthyearglobal horizontal radiationdirect normal radiationopaque sky coverdry-bulb temperaturedew point temperatureatmospheric pressurewind directionwind speedpresent weatherIn the TMY2 header record, all the data items should be filled. For data sets with global horizontal solar data and relativehumidity instead of wet-bulb/dew point, use the <strong>DOE</strong>-2 measured data format described below.Using the <strong>DOE</strong>-2 Measured Weather FormatMeasured weather data can be put in the <strong>DOE</strong>-2 measured weather data format. This format uses metric units and contains themost commonly measured weather variables. For instance the format uses relative humidity rather than wet-bulb or dew-pointtemperature and global horizontal solar rather than direct & diffuse.Format:The file must be 8760 records in length, each record being 80 characters long.Item Columns Format Unitshour 1 - 2 I2day 3 - 4 I2month 5 - 6 I2year 7 -10 I4drybulb 11-20 F10.1 Centigraderelative humidity 21-30 F10.2 a fraction, 0.0 to 1.0atmos. pressure 31-40 F10.1 millibarstotal horiz. rad. 41-50 F10.0 watts/m2wind speed 51-60 F10.1 m/sWind dir. 61-70 F10.0 degrees from north (north=0;east=90)sky cover 71-80 F10.1 a fraction 0.0 to 1.0All quantities must be filled. If sky cover is unknown, put in -999.The raw hourly weather file will look something like this (1 day only):1 1 11997 20.0 0.6 1003.6 0. 4.5 273. 0.32 1 11997 21.0 0.6 1003.6 0. 4.5 273. 0.33 1 11997 22.0 0.6 1003.6 0. 4.5 273. 0.34 1 11997 23.0 0.6 1003.6 0. 4.5 273. 0.35 1 11997 24.0 0.6 1003.6 0. 4.5 273. 0.36 1 11997 25.0 0.6 1003.6 0. 4.5 273. 0.37 1 11997 26.0 0.6 1003.6 50. 4.5 273. 0.38 1 11997 27.0 0.6 1003.6 200. 4.5 273. 0.39 1 11997 28.0 0.6 1003.6 450. 4.5 273. 0.310 1 11997 29.0 0.6 1003.6 600. 4.5 273. 0.311 1 11997 29.0 0.6 1003.6 750. 4.5 273. 0.312 1 11997 29.0 0.6 1003.6 750. 4.5 273. 0.313 1 11997 28.0 0.6 1003.6 750. 4.5 273. 0.314 1 11997 27.0 0.6 1003.6 600. 4.5 273. 0.315 1 11997 26.0 0.6 1003.6 450. 4.5 273. 0.316 1 11997 25.0 0.6 1003.6 200. 4.5 273. 0.3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!