DOE-2 Reference Manual Version 2.1 - DOE2.com

Card 2: Columns Format1-6 L7-12 R13-18 R19-24 RDescriptionInput type or file type. Options are PACKED,OTHER, TRY, TRYKS, 1440, 1440-3, CD144, CD1443,CTl, WYEC, and TMY.Year of weather data (e.g., 1972). Required forCD144, CD1443, CTZ, 1440-3, and 1440 tapes.TRY, TMY, WYEC, and PACKED should have -999.Station number. Required for WYEC, TRY, andTMY. 1440, 1440-3, CD144, CD1443, CTl, andPACKED can have -999 entered here.Beginning month of listing (1-12 for January -December) •25-30 REnding month of listing (1-12 for January -December) •The next three fields must be supplied only when listing an unpacked TMYor WYEC tape.31-36 R37-42 D43-48 DTime zone (4 = Atlantic, 5 = Eastern, 6 =Central, 7 = Mountain, 8 = Pacific, 9 = Yukon,10 = Hawaii)D station latitude (ON)D Station longitude (OW)(Latitude and longitude should be given totenths of a degree).Note that for 1440, 1440-3, CD144, CD1443 and TRY tapes, the station number orweather year for the first file listed will be printed in the heading for thesecond file. This offset will continue for subsequent file listings.3. EDITThe user is permitted to change up to 336 hours (which corresponds to twoweeks) of data in one run. In addition, the user may change the clearnessnumbers and the ground temperatures. The latter requires three data cards,while the former requires two data cards for each hour being changed. If theuser desires to change the clearness numbers and the ground temperatures thesedata cards must precede the set of pairs of data cards for the hourly changes.Card 1: The word EDIT in columns 1-4.Card 2: Columns Format Description1-6 L A code-word specifying the word size on thepacked output file. Options are 60-BIT or30-BIT .VII I. 39 (Revi sed 5/81)