DOE-2 Reference Manual Version 2.1 - DOE2.com

U-narne= SYSTEM-CONTROL or S-C (User Worksheet)InputRangeKeyword Abbrev. User Input Desc. Default Min. Max.LIKE = U-nameMAX-SUPPLY-T MAX-S-T =of Note 1 50. 200.HEATING-SCHEDULE H-SCH = U-narne Note 2HEAT -CONTROL H-C = code-word Note 1HEAT-SET-T H-S-T =of Note 1 50. 200.HEAT-SET-SCH H-S-SCH= U-nameHEAT-RESET-SCH H-R-SCH= U-name Note 3MIN-SUPPLY-T MIN-S-h of Note 1 45. 70.COOLING-SCHEDULE C-SCH = U-name Note 2COOL-CONTROL C-C = code-word Note 1COOL-SET-T C-S-T =of Note 1 45. 70.COOL-SET -SCH C-S-SCH= U-nameCOOL-RESET-SCH C-R-SCH= U-name Note 4MAX-HUMIDITY MAX-H = per cent Note 1 30. 80.R.H.MIN-HUMIDITY MIN-H = per cent Note 1 O. 70.R.H.BASEBOARD-SCH B-SCH U-narne Note 5ECONO-LIMIT-T E-L-T =of Note 6 45. 80.PREHEAT-T P-T =of Note 1 -50. 70.1) See the proper Applicability Table (Sec. B.4 of this chapter) forappl icabil ity or the default value. If the keyword is not 1 isted in thetable, it is not applicable to the system being specified.2) If no data entry is made for this keyword, the program assumes that thesubject schedule has not been specified, and that the subject component orquantity is "always on" or "always. available when needed", i.e., THRU DEC31 (ALL) (1,24) (1).3) A data entry for this keyword is required if the data entry for the keywordHEAT-CONTROL is the code-word RESET. If otherwise, this keyword is notapplicable.I V. 211 (Revised 5/81)