DOE-2 Reference Manual Version 2.1 - DOE2.com

-------------------------,JOO IIII~ BDL- + IILIBIIIILOADS output: 1iI L _________________________ ~EOJIIIIIExample a:Standard LOADS run.b. Creating a User's Own Library of MATERIALs, LAYERS, and CustomWeightins Factors. Example b. shows how a user would build up a file ofuser-deslgned MATERIALs, LAYERS, and Custom Weighting Factors. For exteriorsurfaces, LAYERS are input with nonzero inside film resistances; theprocessor will automatically build two sets of response factors, with andwithout the inside film resistance. For interior surfaces, each may bedefined as a "delayed" set of LAYERS for Custom Weighting Factor creation. Hemay then make his regular LOADS run with these same definitions of interiorsurfaces; LDL will automatically convert them to the appropriate U-valuedefinitions. To create a file of only, say, MATERIALs and LAYERS, the userwould not make the weighting-factor creation run.To run this optional preprocessor, the user would do the following.Build an input deck for the preprocessor beginning with the instructionLIBRARY-INPUT LOADSFollow this by either or both of the following commands (if both areentered, only the LAYERS library will be built):MATERIALLAYERSThese commands will have their standard keywords in the input. If only theMATERIAL instructions are entered, a MATERIALs library will be created. Ifthe LAYERS instructions are also entered, a response factor 1 ibrary for thoseII I .152 (Revised 5/81)