DOE-2 Reference Manual Version 2.1 - DOE2.com

REPORT LS-A - SPACE PEAK LOADS SUMMARYThis report (see next page) lists each space by U-name and the numberof times each space is repeated (MULTIPLIER) on the left of the report.The individual space peak sensible cooling load with the month, dayand hour it occurred is reported in the center. The sum of the coolingloads for all spaces (which is the non-coincident building peak load) isalso reported.The coincident building peak cooling load (the "block" load) isreported dlrectly below the non-coincident peak but it does not includethe plenum load. The outside dry bulb and wet bulb temperatures are alsoreported for the time of the peak load in each space, and for thebuilding. The peak heating load for PLENUM-1 is shown as 9:00 a.m. onJAN 12. All these hours are in standard time.The heating peak loads are treated similarly on the right.VII.31