DOE-2 Reference Manual Version 2.1 - DOE2.com

12. DAY-ASSIGN-SCHThe DAY-ASSIGN-SCH instruction is used to schedule a LOAD-ASSIGNMENTinstruction.NameU-nameCommandKeywordDAY-ASSIGN-SCH or D-A-SCH LIKEHOURSVALUESTerminatorThis instruction is similar in usage to the DAY-SCHEDULE instruction exceptthat instead of assigning a number by which each of the 24 hourly DAY-SCHEDULEvalues are multiplied (see the keyword SCALE for the DAY-SCHEDULE instruction),a literal specifying the U-name of a LOAD-ASSIGNMENT instruction is defined.U-nameDAY-ASSIGN-SCHAny unique user-defined name must be entered to identify thisinstruction.This command word, informs the POL Processor that the data tofollow will specify a daily schedule for the assignment ofplant equipment.LIKEHOURSVALUESRules:These keywords are defined in the BDL write-up for theDAY-SCHEDULE instruction (see Chap. II, Building DescriptionLanguage) •1. The DAY-ASSIGN-SCH instruction may only be referenced by a schedulelisted in a LOAD-MANAGEMENT instruction.2. DAY-ASSIGN-SCH cannot be nested.Examp 1 es:See the examples discussed in the LOAD-MANAGEMENT instruction.V.97 (Revised 5/81)