DOE-2 Reference Manual Version 2.1 - DOE2.com

REPORT LS-D - BUILDING MONTHLY LOADS SUMMARYThe following report gives monthly summary of cooling, heating, andelectrical requirements plus annual total energy requirements and maximummonthly peak loads. Unconditioned spaces are not included in this report'smonthly load.Once again, the user should be aware that these loads are based on aconstant temperature within each SPACE (that is, no setback, no floating, andno variations within the SPACE). Additionally, these loads do not accountfor conditioning of outside ventilation air. Later, in SYSTEMS, these itemswill be accounted for.1. COOLING, HEATING, and ELEC are the three sections of this building levelreport.2. COOLING ENERGY (millions of Btu) is the monthly sensible load for allSPACEs in the building.3. MAXIMUM COOLING LOAD (thousands of Btu/hrJ is the peak sensible spacecooling load. To the left of this column are the day and hour of thepeak cooling load along with the outside dry bulb and wet bulbtemperatures at the time of the peak.4. HEATING ENERGY (millions of Btu) is the monthly heating load.5. MAXIMUM HEATING LOAD (thousands of Btu/hr) is the peak space heatingload. To the left of this column are the day and hour of the peakheating load along with the outside dry bulb and wet bulb temperatures atthe time of the peak.6. ELECTRICAL ENERGY (kWh) is the monthly electrical consumption for lights,convenience outlets, and non-HVAC equipment.7. MAXIMUM ELEC LOAD (kW) is the monthly peak electrical consumption in aone-hour period for lights, convenience outlets, and miscellaneousequipment input as SOURCE.8. TOTAL is the annual totals for cooling load, heating load, and electricalload for the building.9. MAX is the highest monthly peak cooling load, heating load, andelectrical load.VII.42