DOE-2 Reference Manual Version 2.1 - DOE2.com

Examp le:LS-CLS-DLS-ELS-Fconduction, glass solar, interior surfaces, undergroundsurfaces, occupants-to-space, light-to-space,equipment-to-space, source-to-space, infiltration,total load, and total load/area.Building Peak Load Components provides a breakdownof the heating and cooling load components for theentire building. These components are as describedfor report LS-B above.Building Monthly Loads Summary provides peak andtotal monthly summaries of heating and cooling loads,the time the peak occurs, and the outside drY-bulband wet-bulb temperatures. Annual total heating andcooling loads are displayed. Also provided are peakand total monthly summaries of the electrical loadsplus an annual total. This is the default report.Space Monthly Load Components provides a breakdown ofthe cumulative heating loads, sensible cooling loads,and latent cooling loads (for each SPACE) on amonthly basis, according to the source of the load.The components are walls, roofs, interior surfaces,underground surfaces, infiltration, glass conductance,glass· solar, occupants-to-space, light-tospace,equipment-to-space, source-to-space, andtot a 1 .Building Monthly Load Components provides a breakdownof the cumulative heating loads, sensible coolingloads, and latent cool ing loads (for the entirebuilding) on a monthly basis, according to the sourceof the load. Loads for UNCONDITIONED SPACEs are notincluded. The components are as described for reportLS-E.If all the SUMMARY reports are desired, the user should enter thecode-word ALL-SUMMARY.Examples of the SUMMARY reports may be seen in Chap. VII.To get detailed data on schedules and windows plus a summary of loadsfor each space and a building monthly loads summary, enter the following.LOADS-REPORTVERIFICATION = (LV-G, LV-H)SUMMARY = (LS-D)II 1.124 (Revised 5/81)