DOE-2 Reference Manual Version 2.1 - DOE2.com

HOURLY REPORTSThese optional reports are user-designed. The variables, which are to bedisplayed, are chosen by the user from the lists in Chapter IV (seeREPORT-BLOCK) .I. MMDDHH2. SYST-lTOT HTGCOIL BTU3. SYST-lTOT ZONEHTG BTU4. SYST-lRETURNHUMIDITY5. SYST-lMIXHUMIDITY6. SYST-lHUMIDITYLVG COIL7. SYST-lHTG COILAIR TEMP8. SYST-lCLG COILAIR TEMP9. SYST-lENTERINGAIR TEMP10. SYST-lRETURNAIR TEMPII. SYST-lTOT SYSTCFM12. SYST-lRETURNCFMis the month, day, and hour of the simulation period.Total energy input (in Btu) each hour to the centralheating coil in the SYST-l system.Total energy input (in Btu) each hour to the zoneheating coils served by the SYST-l system.The humidity ratio (in lbs H20/lb dry air) of thereturn air to the SYST-l HVAC unit.The humidity ratio (in lbs H20/lb dry air) of the mixedreturn air and outside ventilation air of the SYST-lsystem. The air is mixed prior to passing over anycentral heating or cooling coils.The humidity ratio (in lbs H20/lb dry air) of the air(supply) leaving the SYST-l cooling coil.The temperature (OF) of the supply air leaving the SYST-lheating coil - hot deck temperature. (Actually, thisvariable is not appropriate to the VAVS system that wasspecified. The program does not check for appropriatenessof variables.)The temperature (OF) of the supply air leaving the SYST-lcooling coil - cold deck temperature.The temperature (OF) of the mixed return air and outsideventilation air of the SYST-l system.The temperature (OF) of the SYST-l return air.The total SYST-l system supply air flow rate (in cfm).The total SYST-l system return air flow rate (in cfm).V I 1. 83 (Revised 5/81)