DOE-2 Reference Manual Version 2.1 - DOE2.com

TIME-TO-HOURCONVERTERTime--Hour12:00Midnight lAM 2 AM 3 AM 4 AM 5 AM 6 AM 7AM 8 AM2 4 5 6 7 8 9 10-/0-:-" I /12:009 AM 10 AM "AM NoonI I" 12Time--Hour-o- J12:00 / I " 12:00Noon IPM 2 PM 3 PM 4PM 5PM 6PM 7PM 8PM 9PM 10 PM " PM MidnightII13 14 15 16 17 18 19 20 21 22 23 24Exarnp le 2:DS2 DAY-SCHEDULE HOURS = (1,8 ) VALUES = (0. )HOURS = (9 ) VALUES ( .5)HOURS = (10,13) VALUES = (.6,.7,.8,.9)HOURS = (14,24) VALUES = (0. ) ..The above instruction illustrates the various options availablewhen entering data for the DAY-SCHEDULE instruction. If only one hour isassigned to an HOURS keyword, only one value may be assigned the nextVALUES keyword. If a range of hours (specified by the starting andending hours) is entered, then a single value may be assigned to the nextVALUES keywoy'd, or a series of valJes may be entered, one for each hourin the range.Rules: 1. A U-name must appear before the DAY-SCHEDULE command.2. All 24 hours must be assigned values. The first hour specifiedmust be 1 and the last hour must be 24. It is not possible tospecify hours through midnight.3. The LIKE keyword may be used (see LIKE section).4. All values assigned to the HOURS and VALUES keywords must beenclosed in parentheses.11.26 (Revised 5/81)