DOE-2 Reference Manual Version 2.1 - DOE2.com

20. LOADS-REPORTThis instruction defines the type of standard report format that will beoutput. The VERIFICATION reports display the physical structure of thebuilding that the user has specified in his input and the SUMMARYreports display the calculated loads.The time period(s) covered in the LOADS-REPORTs are the RUN-PERIODinterval(s), see RUN-PERIOD instruction.Format:LOADS-REPORTVERIFICATIONSUMMARY= (code-word list)= (code-word list)The code-words for the different VERIFICATION reports are given in thefollowing table. These reports are used to verify the data entered bythe user.Code-wordLV-ALV-BLV-CLV-DLV-ELV-FLV-GLV-HLV-ILV-JLV-KVERIFICATIONGeneral Project and Building InputSummary of Spaces Occurring in the ProjectDetails of SpaceDetails of Exterior Surfaces Occurring in the ProjectDetails of Underground Surfaces Occurring in the ProjectDetails of Interior Surfaces Occurring in the ProjectDetails of Schedules Occurring in the ProjectDetails of Windows Occurring in the ProjectDetails of Constructions Occurring in the ProjectDetails of Building Shades Occurring in the ProjectWeighting Factor SummaryIf all the VERIFICATION reports are desired, the user should enter thecode-word ALL-VERIFICATION.Examples of the VERIFICATION reports may be seen in Chap. VII.The code-words for different SUMMARY reports are given in the followingtable. These reports summarize the results of the simulation.Code-WordLS-ALS-BSUMMARYSpace Peak Loads Summary prints the peak heating andcooling loads for each SPACE and for the entire building;the day and hour at which each peak occurs, and. thecorresponding outdoor dry-bulb and wet-bulb temperatures.Space Peak Load Components provides a breakdown by"component" of the peak heating and cooling load for eachSPACE. The components are: walls, roofs, glassII 1.123 (Revised 5/81)