Geode GXLV Processor Series Low Power Integrated x86 Solutions

More documents

Recommendations

Info

Geode GXLV Processor SeriesElectrical Specifications (Continued)6.5.2.4 DC Current MeasurementsThe following tables show the DC current measurements for the 2.2V (Tables 6-7 and 6-8), 2.5V (Tables 6-9 and 6-10),and 2.9V (Tables 6-11 and 6-12) devices of the GXLV processor series.SymbolI CC3ONI CC2ONNote:ParameterTable 6-7. 2.2V DC Characteristics for CPU Mode = “On”TypAvgAbsMax Units CommentsI/O Current @ V CC3 =3.3V(Nominal);CPUmode="On"I CC3 at f CLK = 166 MHz 135 400 mA I CC for V CC3 ,NoteI CC3 at f CLK = 180 MHz 140 410I CC3 at f CLK = 200 MHz 140 420Core Current @ V CC2 = 2.2V (Nominal); CPU mode = "On"I CC2 at f CLK = 166 MHz 775 1010 mA I CC for V CC2 ,NoteI CC2 at f CLK = 180 MHz 820 1060I CC2 at f CLK = 200 MHz 900 1160f CLK ratings refer to internal clock frequency.Table 6-8. 2.2V DC Characteristics for CPU Mode = “Active Idle”, “Standby”, and “Sleep”Symbol Parameter Min Typ Max Units CommentsI CC3IDLEI CC3STBYI CC3SLPI CC2IDLEI CC2STBYI CC2SLPNotes: 1.I/O Current @ V CC3 =3.3V(Nominal);CPUmode="ActiveIdle"I CC3IDLE at f CLK = 166 MHz 130 mA I CC for V CC3 ,I CC3IDLE at f CLK = 180 MHz 135Note 1I CC3IDLE at f CLK = 200 MHz 135I/O Current @ V CC3 =3.3V(Nominal);CPU mode = "Standby"I/O Current @ V CC3 =3.3V(Nominal);CPU mode = "Sleep"Core Current @ V CC2 = 2.2V (Nominal); CPU mode = "Active Idle"7 mA I CC for V CC3 ,Note 23 mA I CC for V CC3 ,Note 3I CC2IDLE at f CLK = 166 MHz 175 mA I CC for V CC2 ,I CC2IDLE at f CLK = 180 MHz 185Note 1I CC2IDLE at f CLK = 200 MHz 200Core Current @ V CC2 =2.2V(Nominal);CPU mode = "Standby"Core Current @ V CC2 =2.2V(Nominal);CPU mode = "Sleep"f CLK ratings refer to internal clock frequency.16 mA I CC for V CC2 ,Note 26 mA I CC for V CC2 ,Note 32. All inputs are at 0.2V or V CC3 – 0.2 (CMOS levels). All inputs except clock are held static and all outputsare unloaded (static I OUT =0mA).3. All inputs are at 0.2V or V CC3 – 0.2 (CMOS levels). All inputs are held static and all outputs are unloaded(static I OUT =0mA).www.national.com 192 Revision 1.3
Electrical Specifications (Continued)SymbolI CC3ONI CC2ONNote:ParameterTable 6-9. 2.5V DC Characteristics for CPU Mode = “On”I/O Current @ V CC3 = 3.3V (Nominal);CPU mode = "On"I CC3 at f CLK = 233 MHzCore Current @ V CC2 =2.5V(Nominal);CPU mode = "On"I CC2 at f CLK = 233 MHzf CLK ratings refer to internal clock frequency.TypAvgAbsMax Units Comments160 420 mA I CC for V CC3 ,Note1200 1560 mA I CC for V CC2 ,NoteGeode GXLV Processor SeriesTable 6-10. 2.5V DC Characteristics for CPU Mode = “Active Idle”, “Standby”, and “Sleep”Symbol Parameter Min Typ Max Units CommentsI CC3IDLEI CC3STBYI CC3SLPI CC2IDLEI CC2STBYI CC2SLPNotes: 1.I/O Current @ V CC3 =3.3V(Nominal);CPU mode = "Active Idle"I CC3IDLE at f CLK = 233 MHzI/O Current @ V CC3 =3.3V(Nominal);CPU mode = "Standby"I/O Current @ V CC3 =3.3V(Nominal);CPU mode = "Sleep"Core Current @ V CC2 =2.5V(Nominal);CPU mode = "Active Idle"I CC2IDLE at f CLK = 233 MHzCore Current @ V CC2 =2.5V(Nominal);CPU mode = "Standby"Core Current @ V CC2 =2.5V(Nominal);CPU mode = "Sleep"f CLK ratings refer to internal clock frequency.150 mA I CC for V CC3 ,Note 18 mA I CC for V CC3 ,Note 24 mA I CC for V CC3 ,Note 3275 mA I CC for V CC2 ,Note 118 mA I CC for V CC2 ,Note 28 mA I CC for V CC2 ,Note 32. All inputs are at 0.2V or V CC3 – 0.2 (CMOS levels). All inputs except clock are held static, and all outputsare unloaded (static I OUT =0mA).3. All inputs are at 0.2V or V CC3 – 0.2 (CMOS levels). All inputs are held static, and all outputs are unloaded(static I OUT =0mA).Revision 1.3 193 www.national.com
Page 4 and 5:
Geode GXLV Processor SeriesTable of
Page 6 and 7:
Page 8:
Page 12 and 13:
Geode GXLV Processor SeriesArchitec
Page 15 and 16:
Architecture Overview (Continued)Ge
Page 17 and 18:
Architecture Overview (Continued)SD
Page 19 and 20:
2.0 Signal DefinitionsThis section
Page 21 and 22:
Signal Definitions (Continued)Index
Page 23 and 24:
Signal Definitions (Continued)PinNo
Page 25 and 26:
Signal Definitions (Continued)Table
Page 27 and 28:
Signal Definitions (Continued)PinNo
Page 29 and 30:
Signal Definitions (Continued)Table
Page 31 and 32:
Signal Definitions (Continued)2.2 S
Page 33 and 34:
Signal Definitions (Continued)2.2.2
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
3.0 Processor ProgrammingThis secti
Page 43 and 44:
Processor Programming (Continued)3.
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Processor Programming (Continued)Bi
Page 51 and 52:
Processor Programming (Continued)Ta
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Processor Programming (Continued)Th
Page 63 and 64:
Page 65 and 66:
Processor Programming (Continued)Ad
Page 67 and 68:
Page 69 and 70:
Processor Programming (Continued)Se
Page 71 and 72:
Page 73 and 74:
Processor Programming (Continued)TY
Page 75 and 76:
Processor Programming (Continued)Ta
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Processor Programming (Continued)Wh
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Integrated Functions (Continued)4.1
Page 99 and 100:
Page 101 and 102:
Integrated Functions (Continued)Mne
Page 103 and 104:
Page 105 and 106:
Integrated Functions (Continued)Bit
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Integrated Functions (Continued)ACT
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Integrated Functions (Continued)Tab
Page 121 and 122:
Integrated Functions (Continued)SDR
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Integrated Functions (Continued).Re
Page 139 and 140:
Integrated Functions (Continued)640
Page 141 and 142: Integrated Functions (Continued)4.5
Page 143 and 144: Integrated Functions (Continued)GX_
Page 145 and 146: Integrated Functions (Continued)11:
Page 147 and 148: Integrated Functions (Continued)Tab
Page 149 and 150: Integrated Functions (Continued)9:0
Page 151 and 152: Integrated Functions (Continued)Bit
Page 163 and 164: Integrated Functions (Continued)Tab
Page 177 and 178: Power Management (Continued)CPU Sus
Page 179 and 180: Power Management (Continued)5.2.2 I
Page 181 and 182: Power Management (Continued)5.3 POW
Page 183 and 184: Power Management (Continued)Table 5
Page 185 and 186: Electrical Specifications (Continue
Page 191: Electrical Specifications (Continue
Page 207 and 208: 7.0 Instruction SetThis section sum
Page 209 and 210: Instruction Set (Continued)7.1.2.3
Page 217 and 218: Instruction Set (Continued)Table 7-
Page 219 and 220: Instruction Set (Continued)Instruct
Page 221 and 222: Instruction Set (Continued)JMP Unco
Page 233 and 234: Instruction Set (Continued)7.5 MMX
Page 235 and 236: Instruction Set (Continued)PCMPEQB
Page 237 and 238: Instruction Set (Continued)PUNPCKHW
Page 241 and 242: Package Specifications (Continued)C
Page 243 and 244:
Package Specifications (Continued)8
Page 245 and 246:
Package Specifications (Continued)S
Page 247:
Geode GXLV Processor Series Low Pow
show all

Geode GXLV Processor Series Low Power Integrated x86 Solutions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?