Apple MainStage 3 Instruments - MainStage 3 Instruments
Apple MainStage 3 Instruments - MainStage 3 Instruments
Apple MainStage 3 Instruments - MainStage 3 Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ultrabeat Step grid<br />
Ultrabeat Step grid overview<br />
The Step grid displays sequence steps on two rows. The steps shown in these rows correspond to<br />
the sound that is currently selected in the Assignment area. Choosing a different sound switches<br />
the sequencer display to show the rows that correspond to the newly selected sound.<br />
The Step grid area contains two rows, each with 32 fields (steps).<br />
Trigger row<br />
Velocity/Gate row<br />
••<br />
Trigger row: Click a button to activate or deactivate the sound on the corresponding beat.<br />
••<br />
Velocity/Gate row: Sets the length (gate time) and velocity of steps entered in the Trigger row.<br />
Both parameters are displayed as a single graphical bar.<br />
••<br />
The bar’s height represents the velocity.<br />
••<br />
The bar’s length, from left to right, indicates the note length.<br />
Create and remove steps<br />
The Trigger row consists of buttons 1 through 32, which represent steps or beats in the selected<br />
sequence. Note trigger events are placed on corresponding steps. This is where you designate<br />
when (on which beat) the selected sound plays.<br />
Note: You can create and remove steps while the step sequencer is running.<br />
Create steps<br />
1 Select the drum sound that you want to create steps for in the Assignment section.<br />
2 Click the On button to start the step sequencer.<br />
3 Choose a pattern and set the length and resolution that you want to use. See Ultrabeat pattern<br />
controls on page 372.<br />
4 Click the buttons you want—1 through 32—to activate or deactivate the selected sound on the<br />
corresponding beat. In the example shown above, these are steps 1 and 6.<br />
Note: An alternate view allows you to simultaneously see and edit the steps of all drum sounds<br />
in the pattern. See Ultrabeat Step grid full view on page 377.<br />
Remove a step<br />
1 Select the drum sound that you want to remove steps from in the Assignment section.<br />
2 Click the buttons—1 through 32—that correspond to the step or steps that you want to remove.<br />
Note: Drag horizontally across the buttons to quickly turn trigger events on or off.<br />
Chapter 14 Ultrabeat 374