Apple MainStage 3 Instruments - MainStage 3 Instruments
Apple MainStage 3 Instruments - MainStage 3 Instruments
Apple MainStage 3 Instruments - MainStage 3 Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
••<br />
Modwhl Temp: Switches as soon as the modulation wheel passes the center position,<br />
regardless of whether you have moved the modulation wheel from high to low or from<br />
low to high positions. This caters to Roland keyboards with combined pitch bend and<br />
modulation controls.<br />
••<br />
Touch: Switches with aftertouch on messages. No switching occurs on aftertouch release.<br />
••<br />
Touch Temp: Switches with aftertouch on messages. A second switch occurs with aftertouch<br />
release messages.<br />
••<br />
SusPdl Toggle: Switches when you press the sustain pedal. No switching occurs when the<br />
sustain pedal is released.<br />
••<br />
SusPdl Temp: Switches when you press the sustain pedal. A second switch occurs when you<br />
release the sustain pedal.<br />
••<br />
CC #18 and CC #19 Toggle: Switches when you press controller 18 or 19. No switching occurs<br />
when either controller is released.<br />
••<br />
CC #18 and CC #19 Temp: Switches when you press controller 18 or 19. A second switch occurs<br />
when you release controller 18 or 19.<br />
Advanced Brake parameters<br />
The advanced cabinet parameters are divided into three groups: Cabinet, Motor, and Brake. See<br />
also Advanced Cabinet parameters and Advanced Motor parameters.<br />
The microphone parameters are described in Vintage B3 Microphone parameters on page 409.<br />
Brake parameters<br />
••<br />
Dry Level knob: Rotate to set the level of the dry signal, which can also be useful if Dry is active<br />
for the Output switch.<br />
••<br />
Output switch: Choose one of two positions that modify Vintage B3 brake mode.<br />
••<br />
Dry: The rotor cabinet is bypassed when stopped, with a delay time of one second. This is<br />
useful when you are using the modulation wheel to switch between fast and slow rotor<br />
speeds. If you then switch to brake mode, the rotors are slowed down during the transition<br />
to the dry sound.<br />
••<br />
Rotor: The movement of the rotor is gradually slowed down to a total stop.<br />
••<br />
Horn/Drum Position knobs: Rotate to set an exact stop position for the Leslie horn or drum<br />
(bass) rotator, respectively. The original Leslie did not provide this type of control. This<br />
occasionally resulted in a horn aimed at the back of the cabinet when it came to a halt,<br />
leading to a muffled sound.<br />
Chapter 15 Vintage B3 407
Change language