E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Setting the No. 3 Display Section 3-11
Operating Procedure This procedure displays PV/SP/MV and PV/SP/Bank No. on the Process
Value/Set Point display. The PV/SP Display Screen Selection parameter is set
to 2.
Operation Level 1. Press the O Key for at least three seconds to move from the operation
PV/SP
level to the initial setting level.
C
25.0
100.0
50.0
Initial Setting Level 2. Press the M Key to select the Move to Advanced Function Setting Level
Input Type
in-t
5
parameter.
Initial Setting Level 3. Use the D Key to enter the password (“−169”).
amov
-169
It is possible to move to the advanced function setting level by either
pressing the M Key or waiting two seconds without pressing any key.
Advanced Function Setting Level 4. Press the M Key to select the PV/SP Display Screen Selection parame-
Parameter
init Initialization
off
ter.
Advanced Function Setting Level 5. Use the U and D Keys to set 2.
6. Press the O Key for at least one second to move from the advanced
function setting level to the initial setting level.
Initial Setting Level 7. Press the O Key for at least one second to move from the initial setting
Input Type
in-t
5
level to the operation level.
The MV will be displayed on the No. 3 display.
Operation Level 8. Press the M Key to confirm that the Bank No. is displayed on the No. 3
C
spdp 4
spdp 2
Operation Level
C
25.0
100.0
50.0
25.0
100.0
b.0
Move to
Advanced
Function Setting
Level
PV/SP Display
Screen Selection
PV/SP
PV/SP
83